​The last decades have seen remarkable advances in computer‐aided design, engineering and manufacturing technologies, multi‐variable simulation tools, medical imaging, biomimetic design, rapid prototyping, micro and nanomanufacturing methods and information management resources, all of which provide new horizons for the Biomedical Engineering fields and the Medical Device Industry. Advanced Design and Manufacturing Technologies for Biomedical Devices covers such topics in depth, with an applied perspective and providing several case studies that help to analyze and understand the key factors of the different stages linked to the development of a novel biomedical device, from the conceptual and design steps, to the prototyping and industrialization phases. Main research challenges and future potentials are also discussed, taking into account relevant social demands and a growing market already exceeding billions of dollars. In time, advanced biomedical devices will decisively change methods and results in the medical world, dramatically improving diagnoses and therapies for all kinds of pathologies. But if these biodevices are to fulfill present expectations, today’s engineers need a thorough grounding in related simulation, design and manufacturing technologies, and collaboration between experts of different areas has to be promoted, as is also analyzed within this handbook.

Advanced manufacturing technologies (AMTs) combine novel manufacturing techniques and machines with the application of information technology, microelectronics and new organizational practices within the manufacturing sector. They include "hard" technologies such as rapid prototyping, and "soft" technologies such as scanned point cloud data manipulation. AMTs contribute significantly to medical and biomedical engineering. The number of applications is rapidly increasing, with many important new products now under development. Advanced Manufacturing Technology for Medical Applications outlines the state of the art in advanced manufacturing technology and points to the future development of this exciting field. Early chapters look at actual medical applications already employing AMT, and progress to how reverse engineering allows users to create system solutions to medical problems. The authors also investigate how hard and soft systems are used to create these solutions ready for building. Applications follow where models are created using a variety of different techniques to suit different medical problems One of the first texts to be dedicated to the use of rapid prototyping, reverse engineering and associated software for medical applications Ties together the two distinct disciplines of engineering and medicine Features contributions from experts who are recognised pioneers in the use of these technologies for medical applications Includes work carried out in both a research and a commercial capacity, with representatives from 3 companies that are established as world leaders in the field – Medical Modelling, Materialise, & Anatomics Covers a comprehensive range of medical applications, from dentistry and surgery to neurosurgery and prosthetic design Medical practitioners interested in implementing new advanced methods will find Advanced Manufacturing Technology for Medical Applications invaluable as will engineers developing applications for the medical industry. Academics and researchers also now have a vital resource at their disposal.

This book highlights recent technological advances, reviews and applications in the field of cardiovascular engineering, including medical imaging, signal processing and informatics, biomechanics, as well as biomaterials. It discusses the use of biomaterials and 3D printing for tissue-engineered heart valves, and also presents a unique combination of engineering and clinical approaches to solve cardiovascular problems. This book is a valuable resource for students, lecturers and researchers in the field of biomedical engineering.

This book constitutes the refereed post-conference proceedings of the 15th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2018, held in Turin, Spain, in July 2018. The 72 revised full papers presented were carefully reviewed and selected from 82 submissions. The papers are organized in the following topical sections: building information modeling; collaborative environments and new product development; PLM for digital factories and cyber physical systems; ontologies and data models; education in the field of industry 4.0; product-service systems and smart products; lean organization for industry 4.0; knowledge management and information sharing; PLM infrastructure and implementation; PLM maturity, implementation and adoption; 3D printing and additive manufacturing; and modular design and products and configuration and change management.

This book constitutes the refereed post-conference proceedings of the 14th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2017, held in Seville, Spain, in July 2017. The 64 revised full papers presented were carefully reviewed and selected from 78 submissions. The papers are organized in the following topical sections: PLM maturity, implementation and adoption; PLM for digital factories; PLM and process simulation; PLM, CAX and knowledge management; PLM and education; BIM; cyber-physical systems; modular design and products; new product development; ontologies, knowledge and data models; and Product, Service, Systems (PSS).

This handbook focuses on the entire development process of biomedical microsystems that promote special interactions with cells. Fundamentals of cell biology and mechanobiology are described as necessary preparatory input for design tasks. Advanced design, simulation, and micro/nanomanufacturing resources, whose combined use enables the development of biomedical microsystems capable of interacting at a cellular level, are covered in depth. A detailed series of chapters is then devoted to applications based on microsystems that offer enhanced cellular control, including microfluidic devices for diagnosis and therapy, cell-based sensors and actuators (smart biodevices), microstructured prostheses for improvement of biocompatibility, microstructured and microtextured cell culture matrices for promotion of cell growth and differentiation, electrophoretic microsystems for study of cell mechanics, microstructured and microtextured biodevices for study of cell adhesion and dynamics, and biomimetic microsystems (including organs-on-chips), among others. Challenges relating to the development of reliable in vitro biomimetic microsystems, the design and manufacture of complex geometries, and biofabrication are also discussed.

The two-volume set IFIP AICT 639 and 640 constitutes the refereed post-conference proceedings of the 18th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2021, held in Curitiba, Brazil, during July 11-14, 2021. The conference was held virtually due to the COVID-19 crisis. The 107 revised full papers presented in these proceedings were carefully reviewed and selected from 133 submissions. The papers are organized in the following topical sections: Volume I: Sustainability, sustainable development and circular economy; sustainability and information technologies and services; green and blue technologies; AI and blockchain integration with enterprise applications; PLM maturity, PLM implementation and adoption within industry 4.0; and industry 4.0 and emerging technologies: Volume II: Design, education and management; lean, design and innovation technologies; information technology models and design; and models, manufacturing and information technologies and services.