Throughout the mining and processing of minerals, the mined ore undergoes a number of crushing, grinding, cleaning, drying, and product sizing operations as it is processed into a marketable commodity. These operations are highly mechanized, and both individually and collectively these processes can generate large amounts of dust. If control technologies are inadequate, hazardous levels of respirable dust may be liberated into the work environment, potentially exposing workers. Accordingly, federal regulations are in place to limit the respirable dust exposure of mine workers. Engineering controls are implemented in mining operations in an effort to reduce dust generation and limit worker exposure.

"Respirable dust exposure has long been known to be a serious health threat to workers in many industries. In coal mining, overexposure to respirable coal mine dust can lead to coal workers' pneumoconiosis (CWP). CWP is a lung disease that can be disabling and fatal in its most severe form. In addition, miners can be exposed to high levels of respirable silica dust, which can cause silicosis, another disabling and/or fatal lung disease. Once contracted, there is no cure for CWP or silicosis. The goal, therefore, is to limit worker exposure to respirable dust to prevent development of these diseases. The passage of the Federal Coal Mine Health and Safety Act of 1969 established respirable dust exposure limits, dust sampling requirements for inspectors and mine operators, a voluntary x-ray surveillance program to identify CWP in underground coal miners, and a benefits program to provide compensation to affected workers and their families. The tremendous human and financial costs resulting from CWP and silicosis in the U.S. underground coal mine workforce are shown by the following statistics: 1. During 1970-2004, CWP was a direct or contributing cause of 69,377 deaths of U.S. underground coal mine workers. 2. During 1980-2005, over $39 billion in CWP benefits were paid to underground coal miners and their families. 3. Recent x-ray surveillance data for 2000-2006 show an increase in CWP cases. Nearly 8% of examined underground coal miners with 25 or more years of experience were diagnosed with CWP. 4. "Continuous miner operator" is the most frequently listed occupation on death certificates that record silicosis as the cause of death. In light of the ongoing severity of these lung diseases in coal mining, this handbook was developed to identify available engineering controls that can help the industry reduce worker exposure to respirable coal and silica dust. The controls discussed in this handbook range from long-utilized controls that have developed into industry standards to newer controls that are still being optimized. The intent was to identify the best practices that are available to control respirable dust levels in underground and surface coal mining operations. This handbook provides general information on the control technologies along with extensive references. In some cases, the full reference(s) will need to be consulted to gain in-depth information on the testing or implementation of the control of interest. The handbook is divided into five chapters. Chapter 1 discusses the health effects of exposure to respirable coal and silica dust. Chapter 2 discusses dust sampling instruments and sampling methods. Chapters 3, 4, and 5 focus on dust control technologies for longwall mining, continuous mining, and surface mining, respectively. Finally, it must be stressed that after control technologies are implemented, the ultimate success of ongoing protection for workers depends on continued maintenance of these controls. NIOSH researchers have often seen appropriate controls installed, but worker overexposures occurred because of the lack of proper maintenance of these controls." - NIOSHTIC-2

Negative environmental events make the headlines. Mining industry examples are the recent incidents at Summitville, Colorado, US, and the cyanide leak at Cambria Resource's Omai Operation in Guyana. In this volatile atmosphere, the publication of the Mining Environmental Handbook comes at an opportune time. It presents an objective, comprehensive and integrated examination of the effects of mining on the environment, and the environmental laws that deal with mining. Though stressing activities in the United States of America, it covers all of North America.North American environmental standards are currently being exported around the world. Consequently, this handbook will be of prime interest in countries that are now coming to terms with mining environmentalism. It should benefit working engineers and environmentalists, manufacturers, legislators, regulators, financiers and journalists. It has been selected as a university textbook. Finally, it will be an indispensable reference during serious discussions about mining environmentalism.

Dust Control and Air Cleaning covers various areas of concerns in the management of airborne particles and air sanitization. The title provides a comprehensive coverage of the methods in regulating air quality The coverage of the text includes airborne particles and health; the dynamics of particles; and sampling methods. The selection details various air purification methods and technologies such as removal of particles by wet scrubbing; cyclone dust separators; and filter materials and practical filters. The book will be of great use to student and professional building services engineers and technicians.