Explaining the principles that underlie strong ground motion simulation, this publication describes various methods for simulating strong ground motions, and presents some examples of strong ground motion simulations using fault rupture modelling. The detailed guidelines and practical tools presented in this Safety Report will be of value to researchers, operating organizations, regulatory bodies, vendors and technical support organizations in the areas of seismic hazard evaluation of nuclear installations. The information provided will also be of great importance for seismic hazard assessments following the Fukushima Daiichi nuclear power plant accident.

This Safety Guide supersedes the 2010 edition of IAEA Safety Standards Series No. SSG-9. It takes account of recently gained knowledge and practices developed by Member States related to seismic hazards, especially lessons from the Fukushima Daiichi accident. It also addresses concomitant events associated with earthquakes, such as tsunamis. The revision provides a clearer separation between the process for assessing the seismic hazards at a specific nuclear installation site and the process for defining the related basis for design and safety assessment of the nuclear installation. Thus, it bridges gaps and avoids undue overlap of the two processes, which correspond to and are performed at different stages of siting of the nuclear installation.

This volume collects several extended articles from the first workshop on Best Practices in Physics-based Fault Rupture Models for Seismic Hazard Assessment of Nuclear Installations (BestPSHANI). Held in 2015, the workshop was organized by the IAEA to disseminate the use of physics-based fault-rupture models for ground motion prediction in seismic hazard assessments (SHA). The book also presents a number of new contributions on topics ranging from the seismological aspects of earthquake cycle simulations for source scaling evaluation, seismic source characterization, source inversion and physics-based ground motion modeling to engineering applications of simulated ground motion for the analysis of seismic response of structures. Further, it includes papers describing current practices for assessing seismic hazard in terms of nuclear safety in low seismicity areas, and proposals for physics-based hazard assessment for critical structures near large earthquakes. The papers validate and verify the models by comparing synthetic results with observed data and empirical models. The book is a valuable resource for scientists, engineers, students and practitioners involved in all aspects of SHA.

This book is a comprehensive compilation of earthquake- and tsunami-related technologies and knowledge for the design and construction of nuclear facilities. As such, it covers a wide range of fields including civil engineering, architecture, geotechnical engineering, mechanical engineering, and nuclear engineering, for the development of new technologies providing greater resistance against earthquakes and tsunamis. It is crucial both for students of nuclear energy courses and for young engineers in nuclear power generation industries to understand the basics and principles of earthquake- and tsunami-resistant design of nuclear facilities. In Part I, "Seismic Design of Nuclear Power Plants", the design of nuclear power plants to withstand earthquakes and tsunamis is explained, focusing on buildings, equipment's, and civil engineering structures. In Part II, "Basics of Earthquake Engineering", fundamental knowledge of earthquakes and tsunamis as well as the dynamic response of structures and foundation ground are explained.

Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

This book is devoted to diverse aspects of earthquake researches, especially to new achievements in seismicity that involves geosciences, assessment, and mitigation. Chapters contain advanced materials of detailed engineering investigations, which can help more clearly appreciate, predict, and manage different earthquake processes. Different research themes for diverse areas in the world are developed here, highlighting new methods of studies that lead to new results and models, which could be helpful for the earthquake risk. The presented and developed themes mainly concern wave's characterization and decomposition, recent seismic activity, assessment-mitigation, and engineering techniques. The book provides the state of the art on recent progress in earthquake engineering and management. The obtained results show a scientific progress that has an international scope and, consequently, should open perspectives to other still unresolved interesting aspects.

Diffuse seismicity refers to earthquakes occurring in locations where no apparent correlation can be made with any causative faults. This publication provides guidance for addressing the seismic hazard from diffuse seismicity in a manner consistent with internationally recognized practices and with reference to relevant IAEA safety standards.