A comprehensive guide to the most useful geotechnical laboratory measurements Cost effective, high quality testing of geo-materials is possible if you understand the important factors and work with nature wisely. Geotechnical Laboratory Measurements for Engineers guides geotechnical engineers and students in conducting efficient testing without sacrificing the quality of results. Useful as both a lab manual for students and as a reference for the practicing geotechnical engineer, the book covers thirty of the most common soil tests, referencing the ASTM standard procedures while helping readers understand what the test is analyzing and how to interpret the results. Features include: Explanations of both the underlying theory of the tests and the standard testing procedures The most commonly-taught laboratory testing methods, plus additional advanced tests Unique discussions of electronic transducers and computer controlled tests not commonly covered in similar texts A support website at www.wiley.com/college/germaine with blank data sheets you can use in recording the results of your tests as well as Microsoft Excel spreadsheets containing raw data sets supporting the experiments

Contains virtually all current laboratory tests for soils, rocks and aggregates in one volume with references to international standards: ASTM, ISRM, BS, and AS.

This Book Highlights The Procedures For 30 Tests Used To Measure The Engineering Properties Of Soil In Both Laboratory And Field Including Dynamic Testing Of Soils. All The Test Procedures Are Based On Indian Standard Practice And Are Very Close To Astm Standards. Features Of This Book Include: * Test Procedures And Tabular Forms For A Maximum Number Of Field And Laboratory Tests. * Classification Of The Soil Tests Based On Type Of Project And Type Of Soil. * A Set Of Questions Is Presented At The End Of Each Chapter For Self Examination. * For Each Test, Theoretical Principles And The Precautions To Be Followed During The Test Are Explained.This Book Will Be Useful To B.Tech./B.E. (Civil Engineering) And M.E./ M.Tech. (Geotechnical Engineering) Students As Laboratory Manual And Reference Book. It Is Hoped That This Book Will Also Be Useful To Field Engineers As Handbook In Soil Mechanics As It Helps In Deciding The Test Programme For A Given Project. Similarly, The Book Will Be Helpful For Quality Control Engineers.

The goal of Characterization, Field Measurement, and Laboratory Testing of Municipal Solid Waste is to fold the current understanding of the properties of municipal solid waste, and the challenges it presents, into adequate guidance for researchers and practitioners who work directly with issues related to waste behavior. This volume is organized into three parts. Part One is a review of the state of the art in some of the most critical properties of municipal solid waste. Part Two attempts to reach some consensus or provide some minimum requirements or recommended procedures for waste characterization. Part Three includes five opinion papers submitted by the invited panelists from the United Kingdom, Brazil, Canada, Japan, and the United States. This new book broadens the current understanding of waste mechanics and improves waste disposal practices both domestically and internationally. It will be valuable to researchers and practicing engineers in the field of waste mechanics. Geotechnical Special Publication No. 209 was developed from papers and discussions presented at the International Symposium on Waste Mechanics, which took place in New Orleans March 11 13, 2008. The symposium was sponsored by the Geo-Institute of ASCE.

This book deals with in-situ tests that are performed in geotechnics to identify and characterize the soil. These measurements are then used to size the Civil Engineering works This book is intended for engineers, students and geotechnical researchers. It provides useful information for use and optimal use of in-situ tests to achieve a better book adaptation of civil engineering on the ground

Manual of Geotechnical Laboratory Soil Testing covers the physical, index, and engineering properties of soils, including compaction characteristics (optimum moisture content), permeability (coefficient of hydraulic conductivity), compressibility characteristics, and shear strength (cohesion intercept and angle of internal friction). Further, this manual covers data collection, analysis, computations, additional considerations, sources of error, precautionary measures, and the presentation results along with well-defined illustrations for each of the listed tests. Each test is based on relevant standards with pertinent references, broadly aimed at geotechnical design applications. FEATURES Provides fundamental coverage of elementary-level laboratory characterization of soils Describes objectives, basic concepts, general understanding, and appreciation of the geotechnical principles for determination of physical, index, and engineering properties of soil materials Presents the step-by-step procedures for various tests based on relevant standards Interprets soil analytical data and illustrates empirical relationship between various soil properties Includes observation data sheet and analysis, results and discussions, and applications of test results This manual is aimed at undergraduates, senior undergraduates, and researchers in geotechnical and civil engineering. Prof. (Dr.) Bashir Ahmed Mir is among the senior faculty of the Civil Engineering Department of the National Institute of Technology Srinagar and has more than two decades of teaching experience. Prof. Mir has published more than 100 research papers in international journals and conferences; chaired technical sessions in international conferences in India and throughout the world; and provided consultancy services to more than 150 projects of national importance to various government and private agencies.

Modeling in Geotechnical Engineering is a one stop reference for a range of computational models, the theory explaining how they work, and case studies describing how to apply them. Drawing on the expertise of contributors from a range of disciplines including geomechanics, optimization, and computational engineering, this book provides an interdisciplinary guide to this subject which is suitable for readers from a range of backgrounds. Before tackling the computational approaches, a theoretical understanding of the physical systems is provided that helps readers to fully grasp the significance of the numerical methods. The various models are presented in detail, and advice is provided on how to select the correct model for your application. - Provides detailed descriptions of different computational modelling methods for geotechnical applications, including the finite element method, the finite difference method, and the boundary element method - Gives readers the latest advice on the use of big data analytics and artificial intelligence in geotechnical engineering - Includes case studies to help readers apply the methods described in their own work