Turbocharging is used more widely than ever in internal combustion engines. Most diesel engines are increasingly so. Turbocharger technology and often commercial turbocharger components are being applied in many other fields including fuel cells, miniature gas turbine engines, and air cycle refrigerators. This book is the first comprehensive treatment of turbochargers and turbocharging to be made widely available in the last twenty years. It is intended to serve as both an introduction to the turbocharger itself, and to the problems of matching a turbocharger with an internal combustion engine. The turbocharger is a highly sophisticated device, which has been described as aerospace gas turbine engineering allied to mass production techniques. Undoubtedly the key to commercial success lies in achieving the correct compromise between performance, life, cost, and this runs as a continuous thread the book. The operation of turbomachines is fundamentally different from that of reciprocating machines, so that the turbocharged engine has many complex characteristics, not all of them desirable. The means by which the advantageous characteristics are exploited to the full, and the technology required to overcome disadvantageous, are fully explained. [Source : d'après la 4e de couverture].

This is a complete guide to selecting, installing, and tuning forced-induction fuel/air systems. Everything involved with these systems will be covered, including assessing power goals, component selection, engine preparation, tools, installation procedures, tuning, vehicle modifications, driveability, and sources.

Thoroughly updated and expanded, Fundamentals of Medium/Heavy Diesel Engines, Second Edition offers comprehensive coverage of basic concepts and fundamentals, building up to advanced instruction on the latest technology coming to market for medium- and heavy-duty diesel engine systems.

Supercharging has long been established as the most successful means to maximise power output from a specific engine size. Through supercharging, the inlet air density is increased, usually by means of a compressor, and by doing so the amount of air trapped in the cylinders is increased accordingly. As a result, efficient burning of a proportionately higher amount of fuel is enabled. By far, the most successful version of supercharging is turbocharging. Here, the expansion in a turbine of the exhaust gases leaving the cylinders supplies the power needed to drive the compressor. At the moment, practically all diesel engines are turbocharged, with a continuously increasing penetration in the highly competitive market of SI-powered vehicles. The current book on turbochargers and turbocharging, comprising fifteen chapters, gathers important and novel research on many modern aspects of turbocharging for all kinds of gasoline and diesel-powered engine applications (automotive, truck, marine and aircraft). For example, characterisation of the value proposition of turbocharged vehicles, marine engines turbo-compounding, fundamental issues of turbocharger lag and its relation with engine-out PM emissions, variable geometric compressors, automotive two-stage turbocharging, and dynamic operation of turbochargers including VGT and surging effects are amongst the topics analysed. Review papers form a very important part of the book, namely the discussion and in-depth analysis of various automotive boosting systems, turbocharger reduced-order modeling, heat transfer and pulsating flows in turbomachinery, mathematical models for turbocharged engines, and turbomachine-based engine throttling. A considerable portion of the book (seven chapters) deals with control-oriented modeling techniques relating to the turbocharger and/or the whole engine power-plant. Such models have proven valuable during the design of both turbochargers and turbocharged engines, and are described and discussed in detail for a variety of automotive and aircraft applications. The book is written for post-graduate students, engineers and researchers in the field of internal combustion engines (diesel and SI) and turbochargers.

Whether youre interested in better performance on the road or extra horsepower to be a winner on the track, this book gives you the knowledge you need to get the most out of your engine and its turbocharger system. Find out what works and what doesnt, which turbo is right for your needs, and what type of set-up will give you that extra boost. Bell shows you how to select and install the right turbo, how to prep your engine, test the systems, and integrate a turbo with EFI or carbureted engine.