A review of the interlaminar fracture indicates that a standard specimen geometry is needed to obtain consistent fracture toughness measurements in polymer matrix composites. In general, the variability of measured toughness values increases as the toughness of the material increases. This variability could be caused by incorrect sizing of test specimens and/or inconsistent data reduction procedures. A standard data reduction procedure is therefore needed as well, particularly for the tougher materials. Little work has been reported on the effects of fiber orientation, fiber architecture, fiber surface treatment or interlaminar fracture toughness, and the mechanisms by which the fibers increase fracture toughness are not well understood. The little data that is available indicates that woven fiber reinforcement and fiber sizings can significantly increase interlaminar fracture toughness. Grady, Joseph E. Glenn Research Center RTOP 505-63-1B...

This book presents a unified approach to fracture behavior of natural and synthetic fiber-reinforced polymer composites on the basis of fiber orientation, the addition of fillers, characterization, properties and applications. In addition, the book contains an extensive survey of recent improvements in the research and development of fracture analysis of FRP composites that are used to make higher fracture toughness composites in various applications.The FRP composites are an emerging area in polymer science with many structural applications. The rise in materials failure by fracture has forced scientists and researchers to develop new higher strength materials for obtaining higher fracture toughness. Therefore, further knowledge and insight into the different modes of fracture behavior of FRP composites are critical to expanding the range of their application.

This volume reports the latest technological advances in polymeric composites and blends, reinforced polymeric and composite materials, and ceramics of engineering importance. It covers topics ranging from physical and mechanical properties testing and characterization to specialty composites.

This multiauthor volume provides a useful summary of current knowledge on the application of fracture mechanics to composite materials. It has been written to fill the gap between the literature on fundamental principles of fracture mechanics and the special publications on the fracture properties of conventional materials, such as metals, polymers and ceramics.The data are represented in the form of about 420 figures (including diagrams, schematics and photographs) and 80 tables. The author index covers more than 500 references, and the subject index more than 1000 key words.