This Bureau of Mines report covers the latest technology in explosives and blasting procedures. It includes information and procedures developed by Bureau research, explosives manufacturers, and the mining industry. It is intended for use as a guide in developing training programs and also to provide experienced blasters an update on the latest state of technology in the broad field of explosives and blasting. Types of explosives and blasting agents and their key explosive and physical properties are discussed. Explosives selection criteria are described. The features of the traditional initiation systems - electrical, detonating cord, and cap and fuse - are pointed out, and the newer nonelectric initiation systems are discussed. Various blasthole priming techniques are described. Blasthole loading of various explosive types is covered. Blast design, including geologic considerations, for both surface and underground blasting is detailed. Environmental effects of blasting such as flyrock and air and ground vibrations are discussed along with techniques of measuring and alleviating these undesirable side effects. Blasting safety procedures are detailed in the chronological order of the blasting process. The various Federal blasting regulations are enumerated along with their Code of Federal Regulations citations. An extensive glossary of blasting related terms is included along with references to articles providing more detailed information on the aforementioned items. Emphasis in the report has been placed on practical considerations.

The Manual of Tests and Criteria contains criteria, test methods and procedures to be used for classification of dangerous goods according to the provisions of Parts 2 and 3 of the United Nations Recommendations on the Transport of Dangerous Goods, Model Regulations, as well as of chemicals presenting physical hazards according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). As a consequence, it supplements also national or international regulations which are derived from the United Nations Recommendations on the Transport of Dangerous Goods or the GHS. At its ninth session (7 December 2018), the Committee adopted a set of amendments to the sixth revised edition of the Manual as amended by Amendment 1. This seventh revised edition takes account of these amendments. In addition, noting that the work to facilitate the use of the Manual in the context of the GHS had been completed, the Committee considered that the reference to the "Recommendations on the Transport of Dangerous Goods" in the title of the Manual was no longer appropriate, and decided that from now on, the Manual should be entitled "Manual of Tests and Criteria".

You don’t need to be a trained soldier to fully appreciate this edition of the U.S. Army Improvised Munitions Handbook (TM 31-210). Originally created for soldiers in guerilla warfare situations, this handbook demonstrates the techniques for constructing weapons that are highly effective in the most harrowing of circumstances. Straightforward and incredibly user-friendly, it provides insightful information and step-by-step instructions on how to assemble weapons and explosives from common and readily available materials. Over 600 illustrations complement elaborate explanations of how to improvise any number of munitions from easily accessible resources. Whether you’re a highly trained solider or simply a civilian looking to be prepared, the U.S. Army Improvised Munitions Handbook is an invaluable addition to your library.

This brief Blaster's Guide will provide methods to quickly create general blast designs by: estimating burden, spacing, stemming and subdrilling as well as explosive loads. Charts are available to help explain blast vibration and air overpressure. The new charts provide comparisons of blast vibration and normal environmental vibration as well as air overpressure compared to wind. These charts provide both the laymen and professional with an easy, understandable method to compare blast effects with normal activities and normal environmental phenomena. The first section of the guide will provide a series of tables that, with little effort, can be used to determine average blast design dimensions. Additional forms are also given for blasting plans, seismic monitoring reports and blasting logs etc. This guide will enable the blaster to estimate dimensions in the field as well as provide the necessary forms for control of blasting operations.