A complete look at the near-field development and subsequent role-up of a wingtip vortex from a NACA 0015 wing section is investigated. Two separate but equally important surveys of the vortex structure in the region adjacent to the wingtip and approximately one chord length downstream of the trailing edge are performed. The two surveys provide qualitative flow-visualization an quantitative velocity measurement data. The near-field development and subsequent role-up of the vortex structures is strongly influenced by the angle-of-attack and the end-cap treatment of the wing section. The velocity field near the wingtip of the NACA 0015 wing section was measured with a triple-sensor hot wire probe and compared to flow visualization images produced with titanium tetrachloride smoke injection and laser illumination. The flat end-cap results indicate the formation of multiple, relatively strong vortex structures as opposed to the formation of a single vortex produced with the round end-cap. The multiple vortices generated by the flat end-cap are seen to rotate around a common ce te in a helical pattern until they eventually merge into a single vortex. Compared to a non-dimensional loading parameter, the results of the velocity and flow visualization data shows a "jetlike" axial velocity profile for loading parameter values on the order of 0.1 and a "wakelike" profile for much lower loading parameter values.Anderson, Elgin A. and Wright, Christopher T.Langley Research CenterWING TIPS; VORTICES; SUBSONIC WIND TUNNELS; AERODYNAMIC CONFIGURATIONS; AERODYNAMIC CHARACTERISTICS; FLOW VISUALIZATION; ANGLE OF ATTACK; TRAILING EDGES; VELOCITY DISTRIBUTION

Fluid Vortices is a comprehensive, up-to-date, research-level overview covering all salient flows in which fluid vortices play a significant role. The various chapters have been written by specialists from North America, Europe and Asia, making for unsurpassed depth and breadth of coverage. Topics addressed include fundamental vortex flows (mixing layer vortices, vortex rings, wake vortices, vortex stability, etc.), industrial and environmental vortex flows (aero-propulsion system vortices, vortex-structure interaction, atmospheric vortices, computational methods with vortices, etc.), and multiphase vortex flows (free-surface effects, vortex cavitation, and bubble and particle interactions with vortices). The book can also be recommended as an advanced graduate-level supplementary textbook. The first nine chapters of the book are suitable for a one-term course; chapters 10--19 form the basis for a second one-term course.

Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements).The proceedings include papers dealing with the following areas of turbulence:·Eddy-viscosity and second-order RANS models ·Direct and large-eddy simulations and deductions for conventional modelling ·Measurement and visualization techniques, experimental studies ·Turbulence control ·Transition and effects of curvature, rotation and buoyancy on turbulence ·Aero-acoustics ·Heat and mass transfer and chemically reacting flows ·Compressible flows, shock phenomena ·Two-phase flows ·Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.

The Twenty-Second Symposium on Naval Hydrodynamics was held in Washington, D.C., from August 9-14, 1998. It coincided with the 100th anniversary of the David Taylor Model Basin. This international symposium was organized jointly by the Office of Naval Research (Mechanics and Energy Conversion S&T Division), the National Research Council (Naval Studies Board), and the Naval Surface Warfare Center, Carderock Division (David Taylor Model Basin). This biennial symposium promotes the technical exchange of naval research developments of common interest to all the countries of the world. The forum encourages both formal and informal discussion of the presented papers, and the occasion provides an opportunity for direct communication between international peers.

The research work of the collaborative research center SFB401 Flow Modulation and Fluid-Structure Interaction at Airplane Wings at the Rheinisch-Westfälische Technische Hochschule (RWTH) Aachen, which is reported in this book, was pos sible due to the financial support of the Deutsche Forschungsgemeinschaft (DFG). The proposal has been approved after evaluation by the referees of DFG selected from other universities and industry, which is gratefully acknowledged. The work is still in progress and now approved to continue until the end of year 2005. More than 50 scientists from universities of the United States, Russia, France, Italy, Japan, Great Britain, Sweden, Netherlands, Switzerland, Austria and research orga nizations NASA, ONERA, NLR, DLR could be invited and have visited the research center, gave seminars on their research on related topics and some of them stayed longer for joined work. Besides its scientific value, also the importance of the pro gram for scientific educa tion becomes evident by looking at the numbers of completed theses, which are up to now about 15 doctoral theses, 40 diploma theses and 70 study theses. The authors of this book acknowledge the valuable support coming from all these persons and institutions. They are especially grateful to the referees having reviewed this work, A. Cohen (Universite Pierre et Marie Curie), J. Cooper (Manchester School of Engineering), W. Devenport (Virginia Tech.), M. Drela (MIT), F. Gern (Avionics Specialties Inc.), A. Griewank (TU Dresden), H. Hönlinger (DLR), P.

This book comprises the proceedings of the 5th International Conference on Mechanical, System, and Control Engineering 2021. The contents of this volume focus on recent technological advances in the field of system dynamics and simulation, precision mechanics, production technology, structural dynamics, nanomaterial engineering, cloud computing and services, energy engineering and management, etc. This book proves a valuable resource for those in academia and industry.