This synthesis report will be of interest to pavement and geotechnical design and research engineers, geologists and engineering geologists, and related laboratory personnel. It describes the current practice for measuring in situ mechanical properties of pavement subgrade soils. The tests conducted to measure the mechanical properties of soil strength and stiffness are the primary topics, and these are discussed in the context of design procedures, factors affecting mechanical properties, and the variability of measurements. Information for the synthesis was collected by surveying U.S., Canadian, and selected European transportation agencies and by conducting a literature search. This TRB report provides information on existing and emerging technologies for static and dynamic, and destructive and nondestructive testing for measuring in situ mechanical properties of pavement subgrade soils. Correlations between in situ and laboratory tests are presented. The effects of existing layers on the measurement of subgrade properties, and soil spatial and seasonal variability are discussed. Most importantly, the use of soil properties in pavement design and evaluation are explained. New applications or improvements to existing test methods to support the use of mechanistic/stochastic-based pavement design procedures are also explained.

The proceedings of June 1993 international symposium held in Atlanta, Georgia, called specifically to develop and standardized evaluation procedures for non-destructive methods of testing pavements. The 29 papers discuss analytical models and techniques, measurement and calculation techniques in the field and laboratory, problems and errors associated with backcalculation methods and design parameters, and testing for other pavement uses. Also includes a history of the quest for a standard and the status of that effort. Reproduced from typescripts. Annotation copyright by Book News, Inc., Portland, OR

This report documents the research performed on evaluation of pavement deflection equipment under Contract DTFH61-85-C-00115 for the Federal Highway Administration. The following devices were included in side-by-side field tests conducted in the Austin, Texas area during the week of August 11, 1986: the Benkelman Beam, C.E.B.T.P. Curviameter, Dynaflect, Dynatest Falling Weight Deflectometer (FWD), Kuab FWD, Phonix FWD, and the Road Rater. The report includes descriptions and comparisons of the devices through information obtained from a literature search, field tests and user survey conducted for this study. The side-by-side test program was performed over a broad range of pavement structures, including thick and thin flexible and rigid pavements, and composite pavements. The measured deflections were compared statistically. Mechanistic interpretations of the measured deflection basins were made and compared.

Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.

As with the previous two symposia, the 32 papers from the June/July, 1999, Seattle symposium present advances in the nondestructive testing of pavements using conventional falling weight deflectometer techniques and other promising techniques such as ground penetrating radar, rolling weight deflecto