Engineering Development of Coal-fired High-performance Power Systems. Technical Progress Report 1, July Through September 1995

Engineering Development of Coal-fired High-performance Power Systems. Technical Progress Report 1, July Through September 1995
Title Engineering Development of Coal-fired High-performance Power Systems. Technical Progress Report 1, July Through September 1995 PDF eBook
Author
Publisher
Pages 19
Release 1995
Genre
ISBN

Download Engineering Development of Coal-fired High-performance Power Systems. Technical Progress Report 1, July Through September 1995 Book in PDF, Epub and Kindle

In phase 1 of the project, a conceptual design of a coal-fired high performance power system was developed, and small scale R & D was done in critical areas of the design. The current Phase of the project includes development through the pilot plant stage, and design of a prototype plant that would be built in Phase 3. Goals have been identified that relate to the efficiency, emissions, costs and general operation of the system. The base case arrangement of the HIPPS cycle is shown in Figure 1. It is a combined cycle plant. This arrangement is referred to as the All Coal HIPPS because it does not require any other fuels for normal operation. A fluidized bed, air blown pyrolyzer converts coal into fuel gas and char. The char is fired in a high temperature advanced furnace (HITAF) which heats both air for a gas turbine and steam for a steam turbine. The air is heated up to 1400F in the HITAF, and the tube banks for heating air are constructed of alloy tubes. The fuel gas from the pyrolyzer goes to a topping combustor where it is used to raise the air entering the gas turbine to 2350F. In addition in the HITAF, steam duty is achieved with a heat recovery steam generator in the gas turbine exhaust stream and economizers in the HITAF flue gas exhaust stream. An alternative HIPPS cycle is shown in Figure 2. This arrangement uses a ceramic air heater to heat the air to temperatures above what can be achieved with alloy tubes. This arrangement is referred as the 35% natural gas HIPPS. A pyrolyzer is used as in the base case HIPPS, but the fuel gas generated is fired upstream of the ceramic air heater instead of in the topping combustor. Gas turbine air is heated to 1400 F in alloy tubes the same as in the All Coal HIPPS. This air then goes to the ceramic air heater where it is heated further before going to the topping combustor. The temperature of the air leaving the ceramic air heater will depend on technological developments in that component.

Government Reports Announcements & Index

Government Reports Announcements & Index
Title Government Reports Announcements & Index PDF eBook
Author
Publisher
Pages 604
Release 1996
Genre Science
ISBN

Download Government Reports Announcements & Index Book in PDF, Epub and Kindle

Energy Research Abstracts

Energy Research Abstracts
Title Energy Research Abstracts PDF eBook
Author
Publisher
Pages 782
Release 1995
Genre Power resources
ISBN

Download Energy Research Abstracts Book in PDF, Epub and Kindle

Fossil Energy Update

Fossil Energy Update
Title Fossil Energy Update PDF eBook
Author
Publisher
Pages 1052
Release 1977
Genre Fossil fuels
ISBN

Download Fossil Energy Update Book in PDF, Epub and Kindle

ERDA Energy Research Abstracts

ERDA Energy Research Abstracts
Title ERDA Energy Research Abstracts PDF eBook
Author United States. Energy Research and Development Administration
Publisher
Pages 776
Release 1977
Genre Medicine
ISBN

Download ERDA Energy Research Abstracts Book in PDF, Epub and Kindle

Government Reports Annual Index

Government Reports Annual Index
Title Government Reports Annual Index PDF eBook
Author
Publisher
Pages 1142
Release 1995
Genre Research
ISBN

Download Government Reports Annual Index Book in PDF, Epub and Kindle

Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.

ASME Technical Papers

ASME Technical Papers
Title ASME Technical Papers PDF eBook
Author
Publisher
Pages 580
Release 1995
Genre Mechanical engineering
ISBN

Download ASME Technical Papers Book in PDF, Epub and Kindle