This book, intended for both students and practising engineers, addresses all the issues pertinent to the implementation of embedded generation.

Distributed power generation is a technology that could help to enable efficient, renewable energy production both in the developed and developing world. It includes all use of small electric power generators, whether located on the utility system, at the site of a utility customer, or at an isolated site not connected to the power grid. Induction generator (IG) is the most commonly used and cheapest technology, compatible with renewable energy resources. Permanent magnet (PM) generators have traditionally been avoided due to high fabrication costs; however, compared with IGs they are more reliable and productive. Distributed Generation thoroughly examines the principles, possibilities and limitations of creating energy with both IGs and PM generators. It takes an electrical engineering approach in the analysis and testing of these generators, and includes diagrams and extensive case study examples to better demonstrate how the integration of energy sources can be accomplished. The book also provides the practical tools needed to model and implement new techniques for generating energy through isolated or grid-connected systems. Besides a chapter introducing the technical, economic and environmental impacts of distributed generation, this book includes: an examination of various phase-balancing schemes for a three-phase IG operating on a single-phase power system; a coupled circuit 2-D finite element analysis of a grid-connected IG, with Steinmetz connection; a study of self-excited induction generator (SEIG) schemes for autonomous power systems, and the voltage and frequency control of SEIG with a slip-ring machine (SESRIG); a report on a PM synchronous generator with inset rotor for achieving a reduced voltage regulation when supplying an autonomous power system, and an analysis of its performance using a two-axis model and finite element method; experimental work on various IG and SEIG schemes. This book is a must-read for engineers, consultants, regulators, and environmentalists involved in energy production and delivery, helping them to evaluate renewable energy sources and to integrate these into an efficient energy delivery system. It is also a superior reference for undergraduates and postgraduates. Designers, operators, and planners will appreciate its unique contribution to the literature in this field.

In the recent years the electrical power utilities have undergone rapid restructuring process worldwide. Indeed, with deregulation, advancement in technologies and concern about the environmental impacts, competition is particularly fostered in the generation side, thus allowing increased interconnection of generating units to the utility networks. These generating sources are called distributed generators (DG) and defined as the plant which is directly connected to distribution network and is not centrally planned and dispatched. These are also called embedded or dispersed generation units. The rating of the DG systems can vary between few kW to as high as 100 MW. Various new types of distributed generator systems, such as microturbines and fuel cells in addition to the more traditional solar and wind power are creating significant new opportunities for the integration of diverse DG systems to the utility. Interconnection of these generators will offer a number of benefits such as improved reliability, power quality, efficiency, alleviation of system constraints along with the environmental benefits. Unlike centralized power plants, the DG units are directly connected to the distribution system; most often at the customer end. The existing distribution networks are designed and operated in radial configuration with unidirectional power flow from centralized generating station to customers. The increase in interconnection of DG to utility networks can lead to reverse power flow violating fundamental assumption in their design. This creates complexity in operation and control of existing distribution networks and offers many technical challenges for successful introduction of DG systems. Some of the technical issues are islanding of DG, voltage regulation, protection and stability of the network. Some of the solutions to these problems include designing standard interface control for individual DG systems by taking care of their diverse characteristics, finding new ways to/or install and control these DG systems and finding new design for distribution system. DG has much potential to improve distribution system performance. The use of DG strongly contributes to a clean, reliable and cost effective energy for future. This book deals with several aspects of the DG systems such as benefits, issues, technology interconnected operation, performance studies, planning and design. Several authors have contributed to this book aiming to benefit students, researchers, academics, policy makers and professionals. We are indebted to all the people who either directly or indirectly contributed towards the publication of this book.

The integration of new sources of energy like wind power, solar-power, small-scale generation, or combined heat and power in the power grid is something that impacts a lot of stakeholders: network companies (both distribution and transmission), the owners and operators of the DG units, other end-users of the power grid (including normal consumers like you and me) and not in the least policy makers and regulators. There is a lot of misunderstanding about the impact of DG on the power grid, with one side (including mainly some but certainly not all, network companies) claiming that the lights will go out soon, whereas the other side (including some DG operators and large parks of the general public) claiming that there is nothing to worry about and that it's all a conspiracy of the large production companies that want to protect their own interests and keep the electricity price high. The authors are of the strong opinion that this is NOT the way one should approach such an important subject as the integration of new, more environmentally friendly, sources of energy in the power grid. With this book the authors aim to bring some clarity to the debate allowing all stakeholders together to move to a solution. This book will introduce systematic and transparent methods for quantifying the impact of DG on the power grid.

This book deals with several selected aspects of electric power quality issues typically faced during grid integration processes of contemporary renewable energy sources. In subsequent chapters of this book the reader will be familiarized with the issues related to voltage and current harmonics and inter-harmonics generation and elimination, harmonic emission of switch-mode rectifiers, reactive power flow control in power system with non-linear loads, modeling and simulation of power quality issues in power grid, advanced algorithms used for estimating harmonic components, and new methods of measurement and analysis of real time accessible power quality related data.

The death of Professor Arthur Wright in the summer of 1996 deprived me of a friend and a colleague whose judgement and experience shaped this book. I pay tribute to his contributions to protection and electrical engineering education. In the five years since the first edition appeared, many developments have taken place and it is now necessary to update the book. The use of digital communications and advanced signal processing techniques is now widespread and several fully numeric relays are available from manu facturers. Two new Chapters 13 and 14 have been added to introduce readers to these concepts and associated techniques. Artificial intelligence is making its impact in all engineering applications and power system protection is no exception. Expert systems, fuzzy logic, artificial neural networks, adaptive and integrated protection, synchronized measurements using the global positioning system, genetic algorithms, flexible a.c. transmission systems, are some of the techniques considered in connection with protection. Although many of these techniques have not yet found major application in protection, it is nevertheless essential for the educated protection engineer to have a basic understanding of the underlying principles and methodology so that he, or she, can evaluate their suitability for new relaying problems and applications. Chapter 15 was therefore added to guide readers through this developing area. I have also added some new material in other chapters to reflect changes over the past years.

As a result of deregulation, the US electric utility industry is undergoing a dramatic transformation with far-reaching technical and social consequences. At the heart of this transformation lies Distributed Generation (DG)-the substitution of centralized electricity production with smaller-scale technologies located in or near facilities and power