This book provides an essential overview of ecotechnologies (also known as green infrastructure or nature-based solutions) which are considered to be relatively resilient to variations in stormwater and wastewater inflow. In particular, it focuses on various types of constructed wetlands, biofilters and ponds. Stormwater flows are inherently variable, due to rainfall events and fluctuations in loading. This variability has significant effects on the performance of treatment systems, but has rarely been specifically addressed in design manuals, performance assessments or modelling. The book’s respective chapters cover the main contaminant categories of interest (nutrients, faecal microbes, metals and emerging contaminants) and their removal processes using ecotechnologies, addressing urban, industrial and agricultural applications. In addition, they review modelling tools with the potential to improve our understanding of flow variability and the ability to simulate and predict responses to it.

Urban Water Crisis and Management: Strategies for Sustainable Development, Sixth Edition presents solutions for the current challenges of urban water and management strategies. Through contributed chapters, a framework is laid out for a reduction of the use of groundwater (heavily overused as a solution) and the alternative options for the supply of water to cities, or for urban water. Sections discuss urban water, its problems and management approaches, address the root causes of the water crisis in urban areas, and cover the scientific and technical knowledge necessary to manage water resources. Significant gaps between developed and developing nations in the procedure of water management are also addressed, along with practical information regarding recycling and the reuse of wastewater which is useful as baseline data for the future. - Presents the quantitative study of water supply in urban areas, identifies water scarcity in megacities, and provides management approaches for sustainable development - Identifies technology and the instruments required for the management and safe supply of water - Includes case studies where these technologies have been successfully used

This book provides a comprehensive understanding of a highly innovative method of natural wastewater treatment using advanced in-groundbioreactors called Eco-Engineered Bioreactors (EEBs), and traces their evolution from the earliest aerated gravel bed versions once known as Engineered Wetlands (EWs) and now known as BREW Bioreactors (BBRs) all the way to today’s wide slate of aerobic and anaerobic varieties. Treatment using EEBs involves passing wastewaters through excavated basins in which they contact fixed films of microbial consortia on permeable substrate media. Written from the perspective of ecological engineers designing EEBs, this guide covers updated information on the state-of-the-art for EEBs, covering their morphologies, testing methods, designs, operations, and microbiology.

Ecotechnologies for wastewater treatment (EWWT) have been used as a cost-effective alternative to conventional wastewater treatment methods for improving the removal of organic carbon, nutrients and pathogenic microorganisms from wastewater. However, due to biochemical transformations of organic matter and nutrients EWWT are net sources of CO2, CH4 and N2O greenhouse gases (GHGs), which may be transferred into the atmosphere contributing to global warming. Greenhouse Gas Emissions from Ecotechnologies for Wastewater Treatment provides scientific information about greenhouse gas, such as CO2, CH4 and N2O, generation and emissions from different municipal EWWT. The main EWWT considered in this book are anaerobic ponds, facultative ponds, duckweed-based ponds, and a freshwater natural wetland perturbed by anthropogenic activities such as wastewater discharge and nutrients from agricultural run-off. The book includes a full literature review of recent publications about GHGs emissions from EWWT. It also introduces the calculation of GHGs flux using a static chamber technique. Besides, the book presents information on the influence of environmental factors such as temperature, pH, DO, and nutrients on GHG emissions produced in EWWT under tropical conditions. This book will be a useful reference for researches and students interested in the broader area of water and climate change subjects. The publication may also be of interest to policy makers concerned with climate change, water sector planning, and wastewater treatment.

There are 2.4 billion people without improved sanitation and another 2.1 billion with inadequate sanitation (i.e. wastewater drains directly into surface waters), and despite improvements over the past decades, the unsafe management of fecal waste and wastewater continues to present a major risk to public health and the environment (UN, 2016). There is growing interest in low cost sanitation solutions which harness natural systems. However, it can be difficult for wastewater utility managers to understand under what conditions such nature-based solutions (NBS) might be applicable and how best to combine traditional infrastructure, for example an activated sludge treatment plant, with an NBS such as treatment wetlands. There is increasing scientific evidence that treatment systems with designs inspired by nature are highly efficient treatment technologies. The cost-effective design and implementation of ecosystems in wastewater treatment is something that exists and has the potential to be further promoted globally as both a sustainable and practical solution. This book serves as a compilation of technical references, case examples and guidance for applying nature-based solutions for treatment of domestic wastewater, and enables a wide variety of stakeholders to understand the design parameters, removal efficiencies, costs, co-benefits for both people and nature and trade-offs for consideration in their local context. Examples through case studies are from across the globe and provide practical insights into the variety of potentially applicable solutions.

This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.

Contents: Overview of Treatment Wetlands; Fundamentals of Treatment Wetlands; Horizontal Flow Wetlands; Vertical Flow Wetlands; French Vertical Flow Wetlands; Intensified and Modified Wetlands; Free Water Surface Wetlands; Other Applications; Additional Aspects.