This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.

Although the semirigidity concept was introduced many years ago, steel structures are usually designed by assuming that beam-to-column joints are either pinned or rigid. Theses assumptions allow a great simplification in structural analysis and design-but they neglect the true behavior of joints. The economic and structural benefits of semirigid joints are well known and much has been written about their use in braced frames. However, they are seldom used by designers, because most semirigid connections have highly nonlinear behavior, so that the analysis and design of frames using them is difficult. In fact, the design problem becomes more difficult as soon as the true rotational behavior of beam-to-column joints is accounted for-the design problem requires many attempts to achieve a safe and economical solution. Structural Steel Semirigid Connections provides a comprehensive source of information on the design of semirigid frames, up to the complete detailing of beam-to-column connections, and focuses on the prediction of the moment-rotation curve of connections. This is the first work that contains procedures for predicting the connection plastic rotation supply-necessary for performing the local ductility control in nonlinear static and dynamic analyses. Extensive numerical examples clarify the practical application of the theoretical background. This exhaustive reference and the awareness it provides of the influence of joint rotational behavior on the elastic and inelastic responses of structures will greatly benefit researchers, professionals, and specification writing bodies devoted to structural steel.

Stability Design of Steel Frames provides a summary of the behavior, analysis and design of structural steel members and frames with flexibly-jointed connections. The book presents the theory and design of structural stability and includes extensions of computer-based analyses for individual members in space with imperfections. It also shows how connection flexibility influences the behavior and design of steel frames and how designers must consider this in a limit-state analysis and design procedure. The clearly written text and extensive bibliography make this a practical book for advanced students, researchers and professionals in civil and structural engineering, as well as a useful supplement to traditional books on the theory and design of structural stability.

Steel frames are used in many commercial high-rise buildings, as well as industrial structures, such as ore mines and oilrigs. Enabling construction of ever lighter and safer structures, steel frames have become an important topic for engineers. This book, split into two parts covering advanced analysis and advanced design of steel frames, guides the reader from a broad array of frame elements through to advanced design methods such as deterministic, reliability, and system reliability design approaches. This book connects reliability evaluation of structural systems to advanced analysis of steel frames, and ensures that the steel frame design described is founded on system reliability. Important features of the this book include: fundamental equations governing the elastic and elasto-plastic equilibrium of beam, sheer-beam, column, joint-panel, and brace elements for steel frames; analysis of elastic buckling, elasto-plastic capacity and earthquake-excited behaviour of steel frames; background knowledge of more precise analysis and safer design of steel frames against gravity and wind, as well as key discussions on seismic analysis. theoretical treatments, followed by numerous examples and applications; a review of the evolution of structural design approaches, and reliability-based advanced analysis, followed by the methods and procedures for how to establish practical design formula. Advanced Design and Analysis of Steel Frames provides students, researchers, and engineers with an integrated examination of this core civil and structural engineering topic. The logical treatment of both advanced analysis followed by advanced design makes this an invaluable reference tool, comprising of reviews, methods, procedures, examples, and applications of steel frames in one complete volume.

This book is the Proceedings of a State-of-the-Art Workshop on Connenctions and the Behaviour, Strength and Design of Steel Structures held at Laboratoire de Mecanique et Technologie, Ecole Normale, Cachan France from 25th to 27th May 1987. It contains the papers presented at the above proceedings and is split into eight main sections covering: Local Analysis of Joints, Mathematical Models, Classification, Frame Analysis, Frame Stability and Simplified Methods, Design Requirements, Data Base Organisation, Research and Development Needs. With papers from 50 international contributors this text will provide essential reading for all those involved with steel structures.

Steel and composite steel–concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications. Featuring numerous step-by-step examples that clearly illustrate the detailed analysis and design of steel and composite members and connections, this practical and easy-to-understand text: Covers plates, members, connections, beams, frames, slabs, columns, and beam-columns Considers bending, axial load, compression, tension, and design for strength and serviceability Incorporates the author’s latest research on composite members Analysis and Design of Steel and Composite Structures is an essential course textbook on steel and composite structures for undergraduate and graduate students of structural and civil engineering, and an indispensable resource for practising structural and civil engineers and academic researchers. It provides a sound understanding of the behavior of structural members and systems.

This book gathers the latest research, innovations, and applications in the field of civil engineering, as presented by leading national and international academics, researchers, engineers, and postgraduate students at the AWAM International Conference on Civil Engineering 2019 (AICCE’19), held in Penang, Malaysia on August 21-22, 2019. The book covers highly diverse topics in the main fields of civil engineering, including structural and earthquake engineering, environmental engineering, geotechnical engineering, highway and transportation engineering, water resources engineering, and geomatic and construction management. In line with the conference theme, “Transforming the Nation for a Sustainable Tomorrow”, which relates to the United Nations’ 17 Global Goals for Sustainable Development, it highlights important elements in the planning and development stages to establish design standards beneficial to the environment and its surroundings. The contributions introduce numerous exciting ideas that spur novel research directions and foster multidisciplinary collaborations between various specialists in the field of civil engineering.