The microbiology of drinking water remains an important worldwide concern despite modem progress in science and engineering. Countries that are more technologically advanced have experienced a significant reduction in water borne morbidity within the last 100 years: This reduction has been achieved through the application of effective technologies for the treatment, disinfec tion, and distribution of potable water. However, morbidity resulting from the ingestion of contaminated water persists globally, and the available ep idemiological evidence (Waterborne Diseases in the United States, G. F. Craun, ed. , 1986, CRC Press) demonstrates a dramatic increase in the number of waterborne outbreaks and individual cases within the United States since the mid-1960s. In addition, it should also be noted that the incidence of water borne outbreaks of unknown etiology and those caused by "new" pathogens, such as Campylobaeter sp. , is also increasing in the United States. Although it might be debated whether these increases are real or an artifact resulting from more efficient reporting, it is clear that waterborne morbidity cannot be ignored in the industrialized world. More significantly, it represents one of the most important causes of illness within developing countries. Approxi mately one-half the world's population experiences diseases that are the direct consequence of drinking polluted water. Such illnesses are the primary cause of infant mortality in many Third World countries.

Microbiology of Drinking Water Production and Distribution addresses the public health aspects of drinking water treatment and distribution. It explains the different water treatment processes, such as pretreatment, coagulation, flocculation, sedimentation, filtration, disinfection, and their impacts on waterborne microbial pathogens and parasites. Drinking water quality may be degraded in water distribution systems—microorganisms form biofilms within distribution systems that allow them to flourish. Various methodologies have been proposed to assess the bacterial growth potential in water distribution systems. Microbiology of Drinking Water Production and Distribution also places drinking water quality and public health issues in context; it addresses the effect of bioterrorism on drinking water safety, particularly safeguards that are in place to protect consumers against the microbial agents involved. In addition, the text delves into research on drinking water quality in developing countries and the low-cost treatment technologies that could save lives. The text also examines the microbiological water quality of bottled water, often misunderstood by the public at large.

The book addresses the interdisciplinary area of water quality monitoring and binds together interests and competences within sensing technology, system behaviour, business needs, legislation, education, data handling, and artificial response algorithms.

The development of biofilms and their role in public health - particularly drinking water - is often overlooked. Ideal for anyone interested in water related issues, Microbiological Aspects of Biofilms and Drinking Water presents an overview of the public health effects associated with drinking water. It highlights the microbiological aspects relat

"Access to safe water is a fundamental human need and therefore a basic human right" --Kofi Annan, United Nations Secretary General Edited by two world-renowned scientists in the field, The Handbook of Water and Wastewater Microbiology provides a definitive and comprehensive coverage of water and wastewater microbiology. With contributions from experts from around the world, this book gives a global perspective on the important issues faced in the provision of safe drinking water, the problems of dealing with aquatic pollution and the processes involved in wastewater management. Starting with an introductory chapter of basic microbiological principles, The Handbook of Water and Wastewater Microbiology develops these principles further, ensuring that this is the essential text for process engineers with little microbiological experience and specialist microbiologists alike. Comprehensive selection of reviews dealing with drinking water and aquatic pollution Provides an understading of basic microbiology and how it is applied to engineering process solutions Suitable for all levels of knowledge in microbiology -from those with no background to specialists who require the depth of information

Maintaining the microbial quality in distribution systems and connected installations remains a challenge for the water supply companies all over the world, despite many years of research. This book identifies the main concerns and knowledge gaps related to regrowth and stimulates cooperation in future research. Microbial Growth in Drinking Water Supplies provides an overview of the regrowth issue in different countries and the water quality problems related to regrowth. The book assesses the causes of regrowth in drinking water and the prevention of regrowth by water treatment and distribution. Editors: Dirk van der Kooij and Paul W.J.J. van der Wielen, KWR Watercycle Research Institute, The Netherlands

Heterotrophic Plate Counts and Drinking-water Safety provides a critical assessment of the role of the Heterotrophic Plate Count (HPC) measurement in drinking water quality management. It was developed from an Expert workshop of 32 scientists convened by the World Health Organization and the WHO/NSF International Collaborating Centre for Drinking Water Safety and Treatment in Geneva, Switzerland. Heterotrophs are organisms, including bacteria, yeasts and moulds, that require an external source of organic carbon for growth. The HPC test (or Standard Plate Count), applied in many variants, is the internationally accepted test for measuring the hetrotrophic microorganism population in drinking water, and also other media. It measures only a fraction of the microorganisms actually present and does not distinguish between pathogens and non-pathogens. High levels of microbial growth can affect the taste and odor of drinking water and may indicate the presence of nutrients and biofilms which could harbor pathogens, as well as the possibility that some event has interfered with the normal production of the drinking water. HPC counts also routinely increase in water that has been treated by an in-line device such as a carbon filter or softener, in water-dispensing devices and in bottled waters and indeed in all water that has suitable nutrients, does not have a residual disinfectant, and is kept under sufficient conditions. There is debate among health professionals as to the need, utility or quantitative basis for health-based standards or guidelines relating to HPC-measured regrowth in drinking water. The issues that were addressed in this work include: the relationship between HPC in drinking water (including that derived from in-line treatment systems, dispensers and bottled water) and health risks for the general public the role of HPC as an indirect indicator or index for pathogens of concern in drinking water the role of HPC in assessing the efficacy and proper functioning of water treatment and supply processes the relationship between HPC and the aesthetic acceptability of drinking water. Heterotrophic Plate Counts and Drinking-water Safety provides valuable information on the utility and the limitations of HPC data in the management and operation of piped water systems as well as other means of providing drinking water to the public. It is of particular value to piped public water suppliers and bottled water suppliers, manufacturers and users of water treatment and transmission equipment and inline treatment devices, water engineers, sanitary and clinical microbiologists, and national and local public health officials and regulators of drinking water quality.