Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Volume 37 (thesis year 1992) reports a total of 12,549 thesis titles from 25 Canadian and 153 US universities (theses submitted in previous years but only now reported are indicated by the thesis year shown in parenthesis). The organization, like that of past years, consists of thesis titles arrange

The selection of the proper materials for a structural component is a critical activity that is governed by many, often conflicting factors. Incorporating materials expert systems into CAD/CAM operations could assist designers by suggesting potential manufacturing processes for particular products to facilitate concurrent engineering, recommending various materials for a specific part based on a given set of characteristics, or proposing possible modifications of a design if suitable materials for a particular part do not exist. This book reviews the structural design process, determines the elements, and capabilities required for a materials selection expert system to assist design engineers, and recommends the areas of expert system and materials modeling research and development required to devise a materials-specific design system.

Providing a range of information on polymers and polymerization techniques, this text covers the gamut of polymer science from synthesis, structure and properties to function and applications. It analyzes speciality polymers, including acrylics, fluoropolymers, polysiplanes, polyphosphazenes, and inorganic and conducting polymers. The book examines the stereochemistry of polymerization and the stereoregularity of polymers.