Voltage source converters (VSCs), among other power converters, play a crucial role in supplying power to both local loads and the grid at the PCC. During stand-alone operation, VSCs ensure stable power for loads by regulating the output voltage. In grid-connected mode, the regulation shifts to controlling output current, such as converter side current (CSC) or grid side current (GSC), to inject sinusoidal current into the electrical grid. The nonlinear characteristics of the loads connected to the power converters result in significantly distorted output voltages. This capability is crucial for applications such as uninterruptible power supply (UPS), emphasizing the importance of precise output voltage control. Similarly, in grid-connected mode, the CSC or the GSC is regulated to inject low THD current. The aim is to mitigate grid current harmonics arising from dead time and distorted grid voltages. Therefore, the harmonic mitigation of the grid current control is investigated in this work. This work presents the implementation of the proportional resonant plus multi-resonant (PR-MR) and practical proportional resonant plus multi-resonant (PMR-MR) harmonic controllers in the voltage and current control loops to mitigate the high-order harmonic currents.

This book is a collection of research articles and critical review articles, describing the overall approach to energy management. The book emphasizes the technical issues that drive energy efficiency in context of power systems. This book contains case studies with and without solutions on modelling, simulation and optimization techniques. It covers some innovative topics such as medium voltage (MV) back-to-back (BTB) system, cost optimization of a ring frame unit in textile industry, rectenna for radio frequency (RF) energy harvesting, ecology and energy dimension in infrastructural designs, 2.4 kW three-phase inverter for aircraft application, study of automatic generation control (AGC) in a two area hydrothermal power system, energy-efficient and reliable depth-based routing protocol for underwater wireless sensor network, and power line communication using LabVIEW. This book is primarily targeted at researchers and senior graduate students, but is also highly useful for the industry professional and scientists.

Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters

Harmonic distortion problems include equipment overheating, motor failures, capacitor failure and inaccurate power metering. The topic of power system harmonics was covered for the first time 20 years ago and the first edition has become a standard reference work in this area. Unprecedented developments in power electronic devices and their integration at all levels in the power system require a new look at the causes and effects of these problems, and the state of hardware and software available for harmonic assessment. Following the successful first edition, this second edition of Power System Harmonics maintains the practical approach to the subject and discusses the impact of advanced power electronic technology on instrumentation, simulation, standards and active harmonic elimination techniques. Features include: A new chapter on modern digital instrumentation techniques. Added sections on active filters and modern distorting devices such as FACTS devices, multilevel conversion, current source, voltage source inverters and turn-OFF-related power electronic devices. References to international standards for harmonics and inter-harmonics. Numerical examples of technique application. Offering a comprehensive understanding of power systems, this book is an asset to power engineers involved in the planning, design and operation of power system generation, transmission and distribution. Researchers and postgraduate students in the field will also benefit from this useful reference.

This book aims to investigate emerging power quality and stability problems as well as their solutions in more-electronics power systems. The majority of methods presented here are validated through simulation and/or experimental results, thereby improving their credibility. The ultimate objective of these methods is to achieve secured operation of modern power systems with increased (up to 100%) renewable energy penetration, which is an emerging topic in this field. Readers will not only learn about the knowledge of more-electronics power systems but also the step-by-step process of how they can implement this to their research work or industrial practice. This book caters to engineers and academics working in the field of power systems with the main focus of improving power quality and stability.

* The first single volume resource for researchers in the field who previously had to depend on separate papers and conference records to attain a working knowledge of the subject. * Brings together the field's diverse approaches into an integrated and comprehensive theory of PWM