Manufacturing and Design presents a fresh view on the world of industrial production: thinking in terms of both abstraction levels and trade-offs. The book invites its readers to distinguish between what is possible in principle for a certain process (as determined by physical law); what is possible in practice (the production method as determined by industrial state-of-the-art); and what is possible for a certain supplier (as determined by its production equipment). Specific processes considered here include metal forging, extrusion, and casting; plastic injection molding and thermoforming; additive manufacturing; joining; recycling; and more. By tackling the field of manufacturing processes from this new angle, this book makes the most out of a reader's limited time. It gives the knowledge needed to not only create well-producible designs, but also to understand supplier needs in order to find the optimal compromise. Apart from improving design for production, this publication raises the standards of thinking about producibility. - Emphasizes the strong link between product design and choice of manufacturing process - Introduces the concept of a "production triangle" to highlight tradeoffs between function, cost, and quality for different manufacturing methods - Balanced sets of questions are included to stimulate the reader's thoughts - Each chapter ends information on the production methods commonly associated with the principle discussed, as well as pointers for further reading - Hints to chapter exercises and an appendix on long exercises with worked solutions available on the book's companion site: http://booksite.elsevier.com/9780080999227/

Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.

Handbook of Footwear Design and Manufacture, Second Edition, is a fully updated, expanded guide on the theories, processes, methodologies and technologies surrounding the footwear supply chain. Topics discussed include engineering design methodology, reducing manufacturing waste, footwear advertisement, emerging imaging technology, advice on the optimization of manufacturing processes for productivity, and summaries of the latest advances from researchers around the globe. This updated edition also includes coverage of sizing and grading based on different footwear styles and methods, AI based personalization and customization, emerging models for online footwear shopping (involving data mining), and new methods for foot data analysis and representation. - Covers many exciting new developments, such as AR/VR, additive manufacturing, customization of footwear, new last design methods, and green footwear - Addresses the entire footwear design and manufacture supply chain - Explains new methods for foot data analysis and representation

Design for Manufacturing assists anyone not familiar with various manufacturing processes in better visualizing and understanding the relationship between part design and the ease or difficulty of producing the part. Decisions made during the early conceptual stages of design have a great effect on subsequent stages. In fact, quite often more than 70% of the manufacturing cost of a product is determined at this conceptual stage, yet manufacturing is not involved. Through this book, designers will gain insight that will allow them to assess the impact of their proposed design on manufacturing difficulty. The vast majority of components found in commercial batch-manufactured products, such as appliances, computers and office automation equipment are either injection molded, stamped, die cast, or (occasionally) forged. This book emphasizes these particular, most commonly implemented processes. In addition to chapters on these processes, the book touches upon material process selection, general guidelines for determining whether several components should be combined into a single component or not, communications, the physical and mechanical properties of materials, tolerances, and inspection and quality control. In developing the DFM methods presented in this book, he has worked with over 30 firms specializing in injection molding, die-casting, forging and stamping. - Implements a philosophy which allows for easier and more economic production of designs - Educates designers about manufacturing - Emphasizes the four major manufacturing processes

Medical devices play an important role in the field of medical and health technology, and encompass a wide range of health care products. Directive 2007/47/EC defines a medical device as any instrument, apparatus, appliance, software, material or other article, whether used alone or in combination, including the software intended by its manufacturer to be used specifically for diagnostic and/or therapeutic purposes and necessary for its proper application, intended by the manufacturer to be used for human beings. The design and manufacture of medical devices brings together a range of articles and case studies dealing with medical device R&D. Chapters in the book cover materials used in medical implants, such as Titanium Oxide, polyurethane, and advanced polymers; devices for specific applications such as spinal and craniofacial implants, and other issues related to medical devices, such as precision machining and integrated telemedicine systems. - Contains articles on a diverse range of subjects within the field, with internationally renowned specialists discussing each medical device - Offers a practical approach to recent developments in the design and manufacture of medical devices - Presents a topic that is the focus of research in many important universities and centres of research worldwide

Textile composites encompass a rather narrow range of materials, based on three-dimensional reinforcements produced using specialist equipment. This book describes the design, manufacture and applications of textile composites. The intention is to describe the broad range of polymer composite materials with textile reinforcements, from woven and non-crimp commodity fabrics to 3-D textiles and their applications. The book gives particular attention to the modelling of textile structures, composites manufacturing methods, and subsequent component performance. This practical book is an invaluable guide for manufacturers of polymer composite components, end-users and designers, structural materials researchers, and textile manufacturers involved in the development of new products with textile composites.