The 20th century saw the development of particle physics research field, with the fundationof the famous Standard Model of particle physics. More specifically during the past 70 years numerous particles have been detected and studied. Alongside those discoveries, the experimental means and detectors has greatly evolved. From the simple Gargamel bubble chamber, which lay the first brick to the Standard Model theory, to the nowadays complex detectors such as the LHC. In the development of newer particles detector, one can distinguish two big categories:the solid state detectors et the gaseous detectors. The former encompass detectors suchas Cherenkov and scintillator counters while the later make use of gases as detection medium. The gaseous detectors have also greatly evolved during the past century from theGeiger-Muller tube to the spark or Pestov chambers, which can cope with the increasing detection rate of particles accelerator. The Parallel Plate Avalanche Chamber is a similar gaseous detector but operates in avalanche mode, where the detected signal is producedby a controlled multiplication of electrons in the gas. The aforementioned detectors were operated in spark mode, where the detection is made through a spark discharge in the gas.The avalanche mode allows even greater detection rates at the expense of signal amplitude. In early 80s a new gaseous detector design began to emerge: the Resistive Plate Chambers.This detector has the particularity to operates in spark or avalanche mode depending on its design. Operated in avalanche mode, they present an impressing detection rates at the expense of very small electric signals, requiring dedicated amplification circuitries. Nowadays the Resistive Plate Chambers are widely used in numerous experiments worldwide,because of their interesting performances and relatively small price. Despite their widespread usage, the Resistive Plate Chambers have not been extensively studied from a simulation and modelisation point of view. Simulation of a detectoris an essential tool for its development and construction, as it allows to test a design and predict the performances one may get. In this work we focused on the description of the physics phenomenons occuring during an electronic avalanche inside a Resistive Plate Chambers operated in avalanche mode, in order to properly modelise and simulate them. We review a detailed model of the ionisation process, which is the fundamental event in any gaseous particle detector, alongside theRiegler-Lippmann-Veenhof model for the electronic avalanche. A C++ simulation has been produced in the context of this work and some results are presented.

This first book to critically summarize the latest achievements and emerging applications within this interdisciplinary topic focuses on one of the most important types of detectors for elementary particles and photons: resistive plate chambers (RPCs). In the first part, the outstanding, international team of authors comprehensively describes and presents the features and design of single and double-layer RPCs before covering more advanced multi-layer RPCs. The second part then focuses on the application of RPCs in high energy physics, materials science, medicine and security. Throughout, the experienced authors adopt a didactic approach, with each subject presented in a simple way, increasing in complexity step by step.

Describes the fundamentals and applications of gaseous radiation detection, ideal for researchers and experimentalists in nuclear and particle physics.

The 28th conference from the Rochester series was the major high energy physics conference in 1996. Volume one contains short reports on new theoretical and experimental results. Volume two consists of the review talks presented in the plenary sessions.

This book describes the fundamentals of particle detectors as well as their applications. Detector development is an important part of nuclear, particle and astroparticle physics, and through its applications in radiation imaging, it paves the way for advancements in the biomedical and materials sciences. Knowledge in detector physics is one of the required skills of an experimental physicist in these fields. The breadth of knowledge required for detector development comprises many areas of physics and technology, starting from interactions of particles with matter, gas- and solid-state physics, over charge transport and signal development, to elements of microelectronics. The book's aim is to describe the fundamentals of detectors and their different variants and implementations as clearly as possible and as deeply as needed for a thorough understanding. While this comprehensive opus contains all the materials taught in experimental particle physics lectures or modules addressing detector physics at the Master's level, it also goes well beyond these basic requirements. This is an essential text for students who want to deepen their knowledge in this field. It is also a highly useful guide for lecturers and scientists looking for a starting point for detector development work.

These proceedings consist of plenary rapporteur talks covering topics of major interest to the high energy physics community and parallel sessions papers which describe recent research results and future plans.