Computers are widely used for the analysis, design, and operation of water resource projects. This gives accurate results, allowing the analysis of complex systems which may not have been possible otherwise, and the investigation and comparison of several different alternatives in a short time, thereby reducing the project costs, optimizing design, and efficient utilization of resources. This volume compiles an edited version of the lecture notes specially prepared by 14 well-known European and North American researchers. Part I deals with free-surface flows. Governing equations are derived and their solution by the finite-difference, finite-element, and boundary-integral methods are discussed. Then, turbulence models, three-dimensional models, dam-break flow models, sediment transport models, and flood routing models are presented. Part II is related to the modeling of steady and transient pressurized flows. Governing equations for both single and two-component flows are derived and numerical methods for their solution are presented. The modeling of water quality in pipe networks, of cooling water systems, and slow and rapid transients is then discussed.

Free-Surface Flow: Computational Methods presents a detailed analysis of numerical schemes for shallow-water waves. It includes practical applications for the numerical simulation of flow and transport in rivers and estuaries, the dam-break problem and overland flow. Closure models for turbulence, such as Reynolds-Averaged Navier-Stokes and Large Eddy Simulation are presented, coupling the aforementioned surface tracking techniques with environmental fluid dynamics. While many computer programs can solve the partial differential equations describing the dynamics of fluids, many are not capable of including free surfaces in their simulations. - Provides numerical solutions of the turbulent Navier-Stokes equations in three space dimensions - Includes closure models for turbulence, such as Reynolds-Averaged Navier-Stokes, and Large Eddy Simulation - Practical applications are presented for the numerical simulation of flow and transport in rivers and estuaries, the dam-break problem and overland flow

Handbook of Fluid Dynamics offers balanced coverage of the three traditional areas of fluid dynamics—theoretical, computational, and experimental—complete with valuable appendices presenting the mathematics of fluid dynamics, tables of dimensionless numbers, and tables of the properties of gases and vapors. Each chapter introduces a different fluid dynamics topic, discusses the pertinent issues, outlines proven techniques for addressing those issues, and supplies useful references for further research. Covering all major aspects of classical and modern fluid dynamics, this fully updated Second Edition: Reflects the latest fluid dynamics research and engineering applications Includes new sections on emerging fields, most notably micro- and nanofluidics Surveys the range of numerical and computational methods used in fluid dynamics analysis and design Expands the scope of a number of contemporary topics by incorporating new experimental methods, more numerical approaches, and additional areas for the application of fluid dynamics Handbook of Fluid Dynamics, Second Edition provides an indispensable resource for professionals entering the field of fluid dynamics. The book also enables experts specialized in areas outside fluid dynamics to become familiar with the field.

The book describes models of aquatic ecosystems, ranging from lakes to estuaries to the deep ocean. It provides a background in the physical and biological processes, numerical methods and elementary ecosystem models. It describes two of the most widely used hydrodynamic models and presents a number of case studies. The practice of modelling in management is discussed.

Flooding accounts for one-third of natural disasters worldwide and for over half the deaths which occur as a result of natural disasters. As the frequency and volume of flooding increases, as a result of climate change, there is a new urgency amongst researchers and professionals working in flood risk management. River Basin Modelling for Flood Risk Mitigation brings together thirty edited papers by leading experts who gathered for the European Union’s Advanced Study Course at the University of Birmingham, UK. The scope of the course ranged from issues concerning the protection of life, to river restoration and wetland management. A variety of topics is covered in the book including climate change, hydro-informatics, hydro-meterology, river flow forecasting systems and dam-break modelling. The approach is broad, but integrated, providing an attractive and informative package that will satisfy researchers and professionals, while offering a sound introduction to students in Engineering and Geography.

Free-Surface Flow: Shallow-Water Dynamics presents a novel approach to this phenomenon. It bridges the gap between traditional books on open-channel flow and analytical fluid mechanics. Shallow-water theory is established by formal integration of the Navier-Stokes equations, and boundary resistance is developed by a rigorous construction of turbulent flow models for channel flow. In addition, the book presents a comprehensive description of shallow-water waves by mathematical analysis. These methods form the foundation for understanding flood routing, sudden water releases, dam and levee break, sluice gate dynamics and wave-current interaction. - Bridges the gap between traditional books on open-channel flow and wave mechanics - Presents a comprehensive description of shallow-water waves by characteristic and bicharacteristic analysis - Presents techniques for wave control and active flood mitigation

Radiological Risk Assessment and Environmental Analysis comprehensively explains methods used for estimating risk to people exposed to radioactive materials released to the environment by nuclear facilities or in an emergency such as a nuclear terrorist event. This is the first book that merges the diverse disciplines necessary for estimating where radioactive materials go in the environment and the risk they present to people. It is not only essential to managers and scientists, but is also a teaching text. The chapters are arranged to guide the reader through the risk assessment process, beginning with the source term (where the radioactive material comes from) and ending with the conversion to risk. In addition to presenting mathematical models used in risk assessment, data is included so the reader can perform the calculations. Each chapter also provides examples and working problems. The book will be a critical component of the rebirth of nuclear energy now taking place, as well as an essential resource to prepare for and respond to a nuclear emergency.