This thesis focuses on the completion and hardware testing of a fault tolerant computer system utilizing Triple Modular Redundancy (TMR). Due to the radiation environment in space, electronics in space applications must be designed to accommodate single event phenomena. While radiation hardened processors are available, they offer lower performance and higher cost than commercial off the shelf processors. In order to utilize non-hardened devices, a fault tolerance scheme such as TMR may be implemented to increase reliability in a radiation environment. The design that was completed in this effort is one such implementation. The completion of the hardware design consisted of programming logic devices, implementing hardware design corrections, and the design of an overall system controller. The testing effort included basic power and ground verification checks to programming, executing, and evaluating programs in read only memory. During this phase, additional design changes were implemented to correct design flaws. This thesis also evaluated the preliminary design changes required for a space implementation of this TMR design. This included design changes due to size, power, and weight restrictions. Additionally, a detailed analysis of component survivability was performed based on past radiation testing.

Unmanned ground vehicles (UGV) are expected to play a key role in the Army's Objective Force structure. These UGVs would be used for weapons platforms, logistics carriers, and reconnaissance, surveillance, and target acquisition among other things. To examine aspects of the Army's UGV program, assess technology readiness, and identify key issues in implementing UGV systems, among other questions, the Deputy Assistant Secretary of the Army for Research and Technology asked the National Research Council (NRC) to conduct a study of UGV technologies. This report discusses UGV operational requirements, current development efforts, and technology integration and roadmaps to the future. Key recommendations are presented addressing technical content, time lines, and milestones for the UGV efforts.

The Handbook of Unmanned Aerial Vehicles is a reference text for the academic and research communities, industry, manufacturers, users, practitioners, Federal Government, Federal and State Agencies, the private sector, as well as all organizations that are and will be using unmanned aircraft in a wide spectrum of applications. The Handbook covers all aspects of UAVs, from design to logistics and ethical issues. It is also targeting the young investigator, the future inventor and entrepreneur by providing an overview and detailed information of the state-of-the-art as well as useful new concepts that may lead to innovative research. The contents of the Handbook include material that addresses the needs and ‘know how’ of all of the above sectors targeting a very diverse audience. The Handbook offers a unique and comprehensive treatise of everything one needs to know about unmanned aircrafts, from conception to operation, from technologies to business activities, users, OEMs, reference sources, conferences, publications, professional societies, etc. It should serve as a Thesaurus, an indispensable part of the library for everyone involved in this area. For the first time, contributions by the world’s top experts from academia, industry, government and the private sector, are brought together to provide unique perspectives on the current state-of-the-art in UAV, as well as future directions. The Handbook is intended for the expert/practitioner who seeks specific technical/business information, for the technically-oriented scientists and engineers, but also for the novice who wants to learn more about the status of UAV and UAV-related technologies. The Handbook is arranged in a user-friendly format, divided into main parts referring to: UAV Design Principles; UAV Fundamentals; UAV Sensors and Sensing Strategies; UAV Propulsion; UAV Control; UAV Communication Issues; UAV Architectures; UAV Health Management Issues; UAV Modeling, Simulation, Estimation and Identification; MAVs and Bio-Inspired UAVs; UAV Mission and Path Planning; UAV Autonomy; UAV Sense, Detect and Avoid Systems; Networked UAVs and UAV Swarms; UAV Integration into the National Airspace; UAV-Human Interfaces and Decision Support Systems; Human Factors and Training; UAV Logistics Support; UAV Applications; Social and Ethical Implications; The Future of UAVs. Each part is written by internationally renowned authors who are authorities in their respective fields. The contents of the Handbook supports its unique character as a thorough and comprehensive reference book directed to a diverse audience of technologists, businesses, users and potential users, managers and decision makers, novices and experts, who seek a holistic volume of information that is not only a technical treatise but also a source for answers to several questions on UAV manufacturers, users, major players in UAV research, costs, training required and logistics issues.

New for the third edition, chapters on: Complete Exercise of the SE Process, System Science and Analytics and The Value of Systems Engineering The book takes a model-based approach to key systems engineering design activities and introduces methods and models used in the real world. This book is divided into three major parts: (1) Introduction, Overview and Basic Knowledge, (2) Design and Integration Topics, (3) Supplemental Topics. The first part provides an introduction to the issues associated with the engineering of a system. The second part covers the critical material required to understand the major elements needed in the engineering design of any system: requirements, architectures (functional, physical, and allocated), interfaces, and qualification. The final part reviews methods for data, process, and behavior modeling, decision analysis, system science and analytics, and the value of systems engineering. Chapter 1 has been rewritten to integrate the new chapters and updates were made throughout the original chapters. Provides an overview of modeling, modeling methods associated with SysML, and IDEF0 Includes a new Chapter 12 that provides a comprehensive review of the topics discussed in Chapters 6 through 11 via a simple system – an automated soda machine Features a new Chapter 15 that reviews General System Theory, systems science, natural systems, cybernetics, systems thinking, quantitative characterization of systems, system dynamics, constraint theory, and Fermi problems and guesstimation Includes a new Chapter 16 on the value of systems engineering with five primary value propositions: systems as a goal-seeking system, systems engineering as a communications interface, systems engineering to avert showstoppers, systems engineering to find and fix errors, and systems engineering as risk mitigation The Engineering Design of Systems: Models and Methods, Third Edition is designed to be an introductory reference for professionals as well as a textbook for senior undergraduate and graduate students in systems engineering.

Provides link to sites where book in zip file can be downloaded.