Section 1: Key Issues Section 2: Schematic DesignSection 3: Design DevelopmentSection 4: Final DesignSection 5: ConstructionSection 6: Post-Construction Startup and System CommissioningSection 7: Works Cited

Prepared in cooperation with Disney Development Company, this book deals exclusively with aspects of the design, construction or operation of buildings for which even relatively minor errors can have devastating results when the building is located in a hot, humid climate. Disney's consistent adherence to the principles outlined in this manual has dramatically reduced problems in its new construction. The information presented combines the experience of CH2M Hill, the largest environmental engineering firm in the U.S., and Disney, one of the premier facility planning and management firms in the world. Key issues covered include indoor air quality problem factors; hot humid climate considerations; new building failure; and a model for future success. Specifically addressed are schematic design, design development, final design, construction, and post-construction startup and system commissioning. The concepts and approaches presented are those which have proven successful in designing and operating problem-free indoor building environments in hot and humid locations.

Building defects still continue to plague the construction industry. The lessons learned over the last forty years have not been fully applied. Many new or refurbished buildings still leak or crack. Lack of awareness by designers and installers as to the main mechanisms that trigger such failures remains a problem for the industry. Investigating and rectifying building failures form a major part of building surveyors’ bread and butter work. This book provides guidance on this work for typical residential, commercial and industrial buildings – with advice on how to diagnose a wide range of defects with an emphasis on evidence based practice throughout. It considers both modern and older construction methods, together with new and traditional materials. The particular problems of alteration and renovation work are also discussed. The first four chapters provide information and guidance on the methodology for investigating failures – how to prepare for and conduct an investigation into a building defect and subsequently diagnose its cause in a logical manner. This fourth edition has been updated and expanded to cover the latest diagnostic procedures and research. It also includes Appendices and a new Bibliography, and provides an extensive list of books on building pathology and related topics in the UK and North America. It is essential reading for all students and practitioners interested in building surveying and building conservation.

Lean Project Delivery and Integrated Practices in Modern Construction is the new and enhanced edition of the pioneering book Modern Construction by Lincoln H. Forbes and Syed M. Ahmed. This book provides a multi-faceted approach for applying lean methodologies to improve design and construction processes. Recognizing the wide diversity in the landscape of projects, and encompassing private and public sector activity, buildings and infrastructure, the book expands upon the detailed coverage of integrated project delivery and new lean tools and techniques to include: Greater emphasis on the importance of creating a lean culture and the initiatives required to transform the industry; Expanded discussions of the foundational writings in lean construction theory; Exploration of the synergies between "lean" and "green" initiatives; Specific procedures for modifying planning and scheduling activities to improve the performance of the project team; Expanded sections on quality, and topics that have become a part of the lean lexicon, such as Choosing by Advantages, "line of balance"/location-based scheduling, virtual design teams, takt time planning and set-based design; Discussion questions for beginners and advanced lean practitioners; and Improved cross-referencing within the text to help the reader navigate the frameworks, techniques and tools to support the application of lean principles. The techniques described here enhance the use of resources, reducing waste, minimizing delays, increasing quality and reducing overall costs. They enable practitioners to improve the quality of the built environment, secure higher levels of customer/owner satisfaction, and simultaneously improve their profitability. This book is essential reading for all those wanting to be at the forefront of construction management and lean thinking.

Get the updated guide to active and passive control systems for buildings. To capitalize on today's rapidly evolving, specialized technologies, architects, designers, builders, and contractors work together to plan the mechanical and electrical equipment that controls the indoor environment of a building. The Building Environment: Active and Passive Control Systems, Third Edition helps you take advantage of design innovations and construction strategies that maximize the comfort, safety, and energy efficiency of buildings. From active HVAC systems to passive methods, lighting to on-site power generation, this updated edition explains how to strategically plan for and incorporate effective, efficient systems in today's buildings. It covers the underlying thermal theories and thermodynamic principles and focuses on design that enhances the building environment and minimizes the impact on the world's environment. The Building Environment goes beyond the ABCs of HVAC and covers: On-site power generation, including wind turbines, solar photovoltaic cells, fuel cells, and more. Plumbing systems, fire protection, signal systems, conveying systems, and architectural acoustics. Procedures and/or formulas for performing heat loss, heat gain, and energy use calculations, determining the rate of heat flow, calculating solar energy utilization, doing load calculations, and more. Details on the latest building codes and standards references. New information on the sustainable design of building systems and energy efficiency, including new technologies. The latest thinking and data on a building's impact on the environment, indoor air quality, and "sick building syndrome." Design economics, including the payback period, life-cycle cost, comparative value analysis, and building commissioning. A practical on-the-job tool for architects, designers, builders, engineers, contractors, and other specialists, this Third Edition is also a great reference for architecture students who will lead tomorrow's design teams.

This book aims to provide readers with some of the current trends in mycology. Its chapters include discussions on the major invasive fungal diseases, host-pathogen interactions, relationships between fungal growth and the environment, the use of fungal species to control soil parasites, and the antifungal properties of thiosulfonates. The information herein covers topics in mycological research and will be of interest to students and researchers in all biological sciences.

Sustainability Principles and Practice gives an accessible and comprehensive overview of the interdisciplinary field of sustainability. The focus is on furnishing solutions and equipping students with both conceptual understanding and technical skills. Each chapter explores one aspect of the field, first introducing concepts and presenting issues, then supplying tools for working toward solutions. Elements of sustainability are examined piece by piece, and coverage ranges over ecosystems, social equity, environmental justice, food, energy, product life cycles, cities, and more. Techniques for management and measurement as well as case studies from around the world are provided. The 3rd edition includes greater coverage of resilience and systems thinking, an update on the Anthropocene as a formal geological epoch, the latest research from the IPCC, and a greater focus on diversity and social equity, together with new details such as sustainable consumption, textiles recycling, microplastics, and net-zero concepts. The coverage in this edition has been expanded to include issues, solutions, and new case studies from around the world, including Europe, Asia, and the Global South. Chapters include further reading and discussion questions. The book is supported by a companion website with online links, annotated bibliography, glossary, white papers, and additional case studies, together with projects, research problems, and group activities, all of which focus on real-world problem-solving of sustainability issues. This textbook is designed to be used by undergraduate college and university students in sustainability degree programs and other programs in which sustainability is taught.