Civil Aircraft Electrical Power System Safety Assessment: Issues and Practices provides guidelines and methods for conducting a safety assessment process on civil airborne systems and equipment. As civil aircraft electrical systems become more complicated, electrical wiring failures have become a huge concern in industry and government—especially on aging platforms. There have been several accidents (most recently battery problems on the Boeing 777) with some of these having a relationship to wiring and power generation. Featuring a case study on the continuous safety assessment process of the civil airborne electrical power system, this book addresses problems, issues and troubleshooting techniques such as single event effects (SEE), the failure effects of electrical wiring interconnection systems (EWIS), formal theories and safety analysis methods in civil aircrafts. - Introduces how to conduct assignment of development assurance levels for the electrical power system - Includes safety assessments of aging platforms and their respective Electrical Wiring Interconnection System (EWIS) - Features material on failure mechanisms for wiring systems and discussion of Failure Modes and Effects Analysis (FMEA) sustainment

Aircraft System Safety: Assessments for Initial Airworthiness Certification presents a practical guide for the novice safety practitioner in the more specific area of assessing aircraft system failures to show compliance to regulations such as FAR25.1302 and 1309. A case study and safety strategy beginning in chapter two shows the reader how to bring safety assessment together in a logical and efficient manner. Written to supplement (not replace) the content of the advisory material to these regulations (e.g. AMC25.1309) as well as the main supporting reference standards (e.g. SAE ARP 4761, RTCA/DO-178, RTCA/DO-154), this book strives to amalgamate all these different documents into a consolidated strategy with simple process maps to aid in their understanding and optimise their efficient use. - Covers the effect of design, manufacturing, and maintenance errors and the effects of common component errors - Evaluates the malfunctioning of multiple aircraft components and the interaction which various aircraft systems have on the ability of the aircraft to continue safe flight and landing - Presents and defines a case study (an aircraft modification program) and a safety strategy in the second chapter, after which each of the following chapters will explore the theory of the technique required and then apply the theory to the case study

Demonstrating safety for the application of ever more complex technologies is a formidable task. System engineers often do not have the appropriate training, are unfamiliar with the range of safety approaches, tools and techniques, and their managers do not know when and how these may be applied and appropriately resourced. Aircraft system safety provides a basic skill set for designers, safety practitioners, and their managers by exploring the relationship between safety, legal liability and regulatory requirements. Different approaches to measuring safety are discussed, along with the appropriate safety criteria used in judging acceptability.A wealth of ideas, examples, concepts, tools and approaches from diverse sources and industries is used in Aircraft system safety to bring the theory of safety concisely together in a practical and comprehensive reference. Engineering students, designers, safety assessors (and their managers), regulatory authorities (especially military), customers and projects teams should find Aircraft system safety provides an invaluable guide in appreciating the context, value and limitations of the various safety approaches used in cost-effectively accomplishing safety objectives. - Explores the practical aspects of safety - Invaluable guide for students, designers, and safety assessors - Written by a leading expert in the field

The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.

Up-To-Date Coverage of Every Aspect of Commercial Aviation Safety Completely revised edition to fully align with current U.S. and international regulations, this hands-on resource clearly explains the principles and practices of commercial aviation safety—from accident investigations to Safety Management Systems. Commercial Aviation Safety, Sixth Edition, delivers authoritative information on today's risk management on the ground and in the air. The book offers the latest procedures, flight technologies, and accident statistics. You will learn about new and evolving challenges, such as lasers, drones (unmanned aerial vehicles), cyberattacks, aircraft icing, and software bugs. Chapter outlines, review questions, and real-world incident examples are featured throughout. Coverage includes: • ICAO, FAA, EPA, TSA, and OSHA regulations • NTSB and ICAO accident investigation processes • Recording and reporting of safety data • U.S. and international aviation accident statistics • Accident causation models • The Human Factors Analysis and Classification System (HFACS) • Crew Resource Management (CRM) and Threat and Error Management (TEM) • Aviation Safety Reporting System (ASRS) and Flight Data Monitoring (FDM) • Aircraft and air traffic control technologies and safety systems • Airport safety, including runway incursions • Aviation security, including the threats of intentional harm and terrorism • International and U.S. Aviation Safety Management Systems

The Aircraft Engineering Principles and Practice Series provides students, apprentices and practicing aerospace professionals with the definitive resources to take forward their aircraft engineering maintenance studies and career. This book provides a detailed introduction to the principles of aircraft electrical and electronic systems. It delivers the essential principles and knowledge required by certifying mechanics, technicians and engineers engaged in engineering maintenance on commercial aircraft and in general aviation. It is well suited for anyone pursuing a career in aircraft maintenance engineering or a related aerospace engineering discipline, and in particular those studying for licensed aircraft maintenance engineer status. The book systematically covers the avionic content of EASA Part-66 modules 11 and 13 syllabus, and is ideal for anyone studying as part of an EASA and FAR-147 approved course in aerospace engineering. All the necessary mathematical, electrical and electronic principles are explained clearly and in-depth, meeting the requirements of EASA Part-66 modules, City and Guilds Aerospace Engineering modules, BTEC National Units, elements of BTEC Higher National Units, and a Foundation Degree in aircraft maintenance engineering or a related discipline.