Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, from minerals processing to bulk and fine chemicals, and the food and pharmaceutical industries, yet is rarely found in the curricula of engineering or chemistry departments. With contributions from leading authors in their respective fields, Characterisation of Bulk Solids provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. The reader will then be in a better position to diagnose solids handling and processing problems in industry, and to deal with experts and equipment suppliers from an informed standpoint. Written for post-graduate engineers, chemical scientists and technologists at all stages of their industrial career, the book will also serve as an ideal primer in any of the specialist areas to inform further study.

Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, from minerals processing to bulk and fine chemicals, and the food and pharmaceutical industries, yet is rarely found in the curricula of engineering or chemistry departments. With contributions from leading authors in their respective fields, Characterisation of Bulk Solids provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk par

The book concentrates on powder flow properties, their measurement and applications. These topics are explained starting from the interactions between individual particles up to the design of silos. A wide range of problems are discussed – such as flow obstructions, segregation, and vibrations. The goal is to provide a deeper understanding of the powder flow, and to show practical solutions.

"Bulk Solids Handling: Equipment Selection and Operation provides an overview of the major technologies involved in the storage and handling of particulate materials from large grains to fine cohesive materials. - Topics covered include characterisation of individual particles and bulk particulate materials, silo design for strength and flow, pneumatic conveying systems, mechanical conveying, and small scale operations. - Guidance is given on appropriate equipment choices depending on the type of material to be handled, and applications and limitations of current bulk solids handling equipment are discussed."--Jacket.

An understanding ofthe properties and the handling characteristics of liquids and gases has long been regarded as an essential requirement for most practising engineers. It is therefore not surprising that, over the years, there has been a regular appearance of books dealing with the fundamentals of fluid mechanics, fluid flow, hydraulics and related topics. What is surprising is that there has been no parallel development of the related discipline of Bulk Solids Handling, despite its increasing importance in modern industry across the world. It is only very recently that a structured approach to the teaching, and learning, of the subject has begun to evolve. A reason for the slow emergence of Bulk Solids Handling as an accepted topic of study in academic courses on mechanical, agricultural, chemical, mining and civil engineering is perhaps that the practice is so often taken for granted. Certainly the variety of materials being handled in bulk is almost endless, ranging in size from fine dust to rocks, in value from refuse to gold, and in temperature from deep-frozen peas to near-molten metal.

This book presents a comprehensive review of the most important methods used in the characterisation of piezoelectric, ferroelectric and pyroelectric materials. It covers techniques for the analysis of bulk materials and thick and thin film materials and devices. There is a growing demand by industry to adapt and integrate piezoelectric materials into ever smaller devices and structures. Such applications development requires the joint development of reliable, robust, accurate and – most importantly – relevant and applicable measurement and characterisation methods and models. In the past few years there has been a rapid development of new techniques to model and measure the variety of properties that are deemed important for applications development engineers and scientists. The book has been written by the leaders in the field and many chapters represent established measurement best practice, with a strong emphasis on application of the methods via worked examples and detailed experimental procedural descriptions. Each chapter contains numerous diagrams, images, and measurement data, all of which are fully referenced and indexed. The book is intended to occupy space in the research or technical lab, and will be a valuable and practical resource for students, materials scientists, engineers, and lab technicians.

Over half of the products of the chemical and process industries are sold in a particulate form. The range of such products is vast: from agrochemicals to pigments, from detergents to foods, from plastics to pharmaceuticals. However, surveys of the performance of processes designed to produce particulate products have consistently shown inadequate design and poor reliability. `Particle technology' is a new subject facing new challenges. Chemical and process engineering is becoming less concerned with the design of plants to produce generic simple chemicals (which are often single phase fluids) and is now more concerned with speciality `effect' chemicals which may often be in particulate form. Chemical and process engineers are also being recruited in increasing numbers into areas outside their tranditional fields, such as the food industry, pharmaceuticals and the manufacture of a wide variety of consumer products. This book has been written to meet their needs. It provides comprehensive coverage of the technology of particulate solids, in a form which is both accessible and concise enough to be useful to engineering and science students in the final year of an undergraduate degree, and at Master's level. Although it was written with students of chemical engineering in mind, it will also be of use and interest to students of other disciplines. It comprises an account of the fundamentals of teh subject, illustrated by worked examples, and followed by a wide range of selected applications.