Control engineers, mechanical engineers and mechanical technicians will learn how to select the proper control systems for axial and centrifugal compressors for proper throughput and surge control, with a particular emphasis on surge control. Readers will learn to understand the importance of transmitter speed, digital controller sample time, and control valve stroking time in helping to prevent surge. Engineers and technicians will find this book to be a highly valuable guide on compressor control schemes and the importance of mitigating costly and sometimes catastrophic surge problems. It can be used as a self-tutorial guide or in the classroom with the book's helpful end-of-chapter questions and exercises and sections for keeping notes.

The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies . . . , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Operating plant as close as possible to constraint boundaries so often brings economic benefits in industrial process control. This is the conundrum at the heart of this monograph by Tommy Gravdahl and Olav Egeland on stall control for compressors. Operation of the compressor closer to the surge line can increase operational efficiency and flexibility The approach taken by the authors follows the modern control system paradigm: -physical understanding, detailed modelling and simulation studies and finally control studies. The thoroughness of the presentation, bibliography and appendices indicates that the volume has all the hallmarks of being a classic for its subject. Despite the monograph's narrow technical content, the techniques and insights presented should appeal to the wider industrial control community as well as the gas turbine/compressor specialist. M. J. Grimble and M. A.

High efficiency axial and centrifugal compressors are important in fields as diverse as aircraft engines, superchargers and turbochargers, process and refrigeration compressors. Compressors must achieve high efficiency in blade rows in diffusing flow fields. Of equal and sometimes greater importance is the range os stable operation of the compressor. Blade row stall characteristics determine the limit os stable operation. Blading can stall uniformly with symmetric flow breakdown or asymmetrically in rotating stall, wich propagates around the periphery of the blade row. Depending on aerodynamic conditions, surge may occur instead of, in concert with, or subsequent to blade row stall. The transient breakdown and recovery of aerodynamic loading not only limits compressor performance but also leads to mechanical failures caused by the vibrational loads imposed on the blades. There is no need to know what initiates these performance limits so that surge and stall margins can be optimized and control strategies can be planned. the first step toward understanding is to be knowledgeable about he physical processes occurring during surge and stall. This will permit the designer to anticipate variable geometry needs such as variable inlet guide vanes, variable statuors, and bleed port strategies. Theoritical treatment is far from being well established, however, there are many approaches discussed in the literature. This book is a unique reference to the subject matter. Physical descriptions of the phenomena are given, test results are presented, and analytical studies are discussed. There has been much written about the experimental investigations and theoretical treatments related to surge and stall. To assist those who would pursue advancements in furthering ou knowledge of surge and stall, it seemed appropriate to have a resource that contains a compendium of information on this subject. That is the purpose of this book. [Source : d'après la 4e de couverture].

An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.