This book, Casting Processes and Modelling of Metallic Materials, explores the various casting and modelling activities related to metallic alloy systems. The book provides results of research work conducted by experts from all over the globe to add to the research community in the era of the casting process and modelling. The book was edited by two experts in the field of materials science and modelling, Dr. Abdallah and Dr. Aldoumani, whom both have several publications in peer-reviewed journals, worldwide conferences, and scientific books. The book introduces the casting processes and then discusses the various issues and possible solutions. Over the past years, various models have been proposed and utilized to predict the performance of castings. Some of these models proved to be accurate whereas others failed to predict the casting performance. The strength of any predictive tool depends on the employment of physically meaningful parameters that replicate the real-life conditions. This has been illustrated in the current book with such predictive models and finite element (FE) modelling to illustrate the behaviour of castings in real-life conditions.

Direct strip casting is a continuous casting process for producing metallic sheet directly from the molten state that minimises the need for substantial secondary processing. This important book is the first to review the implications of strip casting technology for a range of alloys, including carbon and stainless steel, aluminium, magnesium, titanium, copper and other non-ferrous alloys.The book is divided into six chapters, with the first two describing the physical metallurgy of candidate alloys for direct strip casting and the development of microstructure during solidification. Chapter 3 describes the principles of continuous casting processes and the evolution of direct strip casting. It provides the foundation for the following two chapters which describe process variables and their impact on microstructure and strip quality. The final chapter describes possible techniques in secondary processing and fabrication of the as-cast strip. Two appendices discuss simulation and modelling issues, and the measurement and representation of textures in metal strip.Direct strip casting of metals and alloys is a standard reference on a technology destined to have a profound impact on the manufacturing landscape of the twenty-first century. - First book to review the implications of strip technology for a range of alloys - Essential book on a technology destined to have a profound impact on the manufacturing landscape of the twenty-first century

The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.

This book deals with metal processing and its numerical modelling and simulation. In total, 21 papers from different distinguished authors have been compiled in this area. Various processes are addressed, including solidification, TIG welding, additive manufacturing, hot and cold rolling, deep drawing, pipe deformation, and galvanizing. Material models are developed at different length scales from atomistic simulation to finite element analysis in order to describe the evolution and behavior of materials during thermal and thermomechanical treatment. Materials under consideration are carbon, Q&T, DP, and stainless steels; ductile iron; and aluminum, nickel-based, and titanium alloys. The developed models and simulations shall help to predict structure evolution, damage, and service behavior of advanced materials.

Written by leading experts in their respective fields, Solidification and Casting provides a comprehensive review of topics fundamental to metallurgy and materials science as well as indicates recent trends. From an industrial perspective, the book begins with chapters on the casting techniques most commonly used in industry today. It then d

Continuous casting is an industrial process whereby molten metal is solidified into a semi-finished billet, bloom, or slab for subsequent rolling in finishing mills; it is the most frequently used process to cast not only steel, but also aluminium and copper alloys. Since its widespread introduction for steel in the 1950s, it has evolved to achieve improved yield, quality, productivity and cost efficiency. It allows lower-cost production of metal sections with better quality, due to the inherently lower costs of continuous, standardized production of a product, as well as providing increased control over the process through automation. Nevertheless, challenges remain and new ones appear, as ways are sought to minimize casting defects and to cast alloys that could originally only be cast via other means. This Special Issue of the journal "Metals" consists of 14 research articles that cover many aspects of experimental work and theoretical modelling related to the ongoing development of continuous casting processes.

The Light Metals symposia are a key part of the TMS Annual Meeting & Exhibition, presenting the most recent developments, discoveries, and practices in primary aluminum science and technology. Publishing the proceedings from these important symposia, the Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2015 collection includes papers from the following symposia: 1.Alumina and Bauxite 2.Aluminum Alloys: Fabrication, Characterization and Applications 3.Aluminum Processing 4.Aluminum Reduction Technology 5.Cast Shop for Aluminum Production 6.Electrode Technology for Aluminum Production 7.Strip Casting of Light Metals