This is a follow-up and companion to the successful How to Build a Flathead Ford V-8. This new edition describes the build-up of a 1946-1948 model 59 engine with a 4-barrel carburetor, a blown French flathead engine, and a blown Ardun engine-designed for street use. Many French flathead engines have been purchased by flathead lovers in the United States. There is a strong demand for those engine blocks, and the purchasers are desperate for any build-up information. The popularity of the Ardun is amazing, and this second volume contains a load of new information about the Ardun, as well as information and photographs of the lastest flathead goodies, such as crankshafts, connecting rods, intake manifolds, and cylinder heads.

Since 1991, the popular and highly modifiable Ford 4.6-liter has become a modern-day V-8 phenomenon, powering everything from Ford Mustangs to hand-built hot rods and the 5.4-liter has powered trucks, SUVs, the Shelby GT500, and more. The wildly popular 4.6-liter has created an industry unto itself with a huge supply of aftermarket high-performance parts, machine services, and accessories. Its design delivers exceptional potential, flexibility, and reliability. The 4.6-liter can be built to produce 300 hp up to 2,000 hp, and in turn, it has become a favorite among rebuilders, racers, and high-performance enthusiasts. 4.6-/5.4-Liter Ford Engines: How to Rebuild expertly guides you through each step of rebuilding a 4.6-liter as well as a 5.4-liter engine, providing essential information and insightful detail. This volume delivers the complete nuts-and-bolts rebuild story, so the enthusiast can professionally rebuild an engine at home and achieve the desired performance goals. In addition, it contains a retrospective of the engine family, essential identification information, and component differences between engines made at Romeo and Windsor factories for identifying your engine and selecting the right parts. It also covers how to properly plan a 4.6-/5.4-liter build-up and choose the best equipment for your engine's particular application. As with all Workbench Series books, this book is packed with detailed photos and comprehensive captions, where you are guided step by step through the disassembly, machine work, assembly, start-up, break-in, and tuning procedures for all iterations of the 4.6-/5.4-liter engines, including 2-valve and 3-valve SOHC and the 4-valve DOHC versions. It also includes an easy-to-reference spec chart and suppliers guide so you find the right equipment for your particular build up.

The 4.6- and 5.4-liter modular Ford engines are finally catching up with the legendary 5.0L in terms of aftermarket support and performance parts availability. Having a lot of parts to choose from is great for the enthusiast, but it can also make it harder to figure out what parts and modifications will work best. Building 4.6/5.4L Ford Horsepower on the Dyno takes the guesswork out of modification and parts selection by showing you the types of horsepower and torque gains expected by each modification. Author Richard Holdener uses over 340 photos and 185 back-to-back dyno graphs to show you which parts increase horsepower and torque, and which parts don't deliver on their promises. Unlike sources that only give you peak numbers and gains, Building 4.6/5.4L Ford Horsepower on the Dyno includes complete before-and-after dyno graphs, so you can see where in the RPM range these parts make (or lose) the most horsepower and torque. Holdener covers upgrades for 2-, 3-, and 4-valve modular engines, with chapters on throttle bodies and inlet elbows, intake manifolds, cylinder heads, camshafts, nitrous oxide, supercharging, turbocharging, headers, exhaust systems, and complete engine buildups.

Ford's 351 Cleveland was designed to be a "mid-sized" V-8 engine, and was developed for higher performance use upon its launch in late 1969 for the 1970 models. The Cleveland engine addressed the major shortcoming of the Windsor engines that preceded it, namely cylinder head air flow. The Windsor engines just couldn't be built at the time to compete effectively with the strongest GM and Mopar small-block offerings, and the Cleveland engine was the answer to that problem. Unfortunately, the Cleveland engine was introduced at the end of Detroit's muscle car era, and the engine, in pure Cleveland form, was very short lived. It did continue on as a low compression passenger car and truck engine in the form of the 351M and 400M, which in their day, offered little in the way of excitement. Renewed enthusiasm in this engine has spawned an influx of top-quality new components that make building or modifying these engines affordable. This new book reviews the history and variations of the 351 Cleveland and Ford's related engines, the 351M and 400M. Basic dimensions and specifications of each engine, along with tips for identifying both design differences and casting numbers are covered. In addition, each engine's strong points and areas of concern are described in detail. Written with high performance in mind, both traditional power tricks and methods to increase efficiency of these specific engines are shared. Also, example builds of 400-, 500-, and even 600-hp engines are highlighted, so you can model your build after any of these powerhouses, depending on your intended use. With the influx of aftermarket parts, especially excellent cylinder heads, the 351 Cleveland as well as the 351M and 400m cousins are now seen as great engines to build. This book will tell you everything you need to know to build a great street or competition engine based in the 351 Cleveland platform.

A guide of more than 35 complete engine buildups offering a wide variety of performance levels for several generations of Ford V8 engine families.

Speed tuning theory and practice, costs, horsepower and torque for all 1932 and later Ford & Mercury Flathead V8s. The performance fundamentals: power, cam, carburetion, compression exhaust and ignition are all covered in this 1951 classic handbook. Details planning the modifications, fitting the block, boring an stroking, flathead and over head-valve cylinder head, scams, pistons, rings, intake manifolds, exhaust headers and special ignitions. A special chapter discusses superchargers.