Basic Laboratory and Industrial Chemicals presents data on 1,000 high-profile chemical substances commonly used in the laboratory and workplace. A wide range of properties is provided for each compound, including the basic physical properties, such as melting point, boiling point, and critical temperature; density; transition properties, such as vapor pressure and heats of vaporization and fusion; and thermodynamic properties, viscosity, and thermal conductivity at 25 degrees centigrade.

Basic Laboratory and Industrial Chemicals presents data on 1,000 high-profile chemical substances commonly used in the laboratory and workplace. A wide range of properties is provided for each compound, including the basic physical properties, such as melting point, boiling point, and critical temperature; density; transition properties, such as vapor pressure and heats of vaporization and fusion; and thermodynamic properties, viscosity, and thermal conductivity at 25 degrees centigrade.

The book describes practical procedures for the destruction of hazardous chemicals and biological agents in the laboratory in which they are used. The book is a continuation and expansion of “Destruction of Hazardous Chemicals in the Laboratory.” It follows the same general approach as the first and second editions but includes a number of new chapters including one on using advanced oxidation techniques as a general means of degrading chemicals. All the monographs from the second edition are incorporated in this volume and are revised and extended as necessary. A number of new monographs describing procedures for the destruction of hazardous chemicals have also been added. The destruction of many pharmaceuticals is also described in this book. This subject has become of increasing importance with recent reports of the detection of pharmaceuticals in the water supply. Finally a new addition is the chapter “General Methods for the Destruction of Hazardous Chemicals in the Laboratory.” This chapter describes recent advanced oxidation methods that should be generally applicable to all organic compounds. The methods use commonly available laboratory equipment and reagents.

Now in its fifth edition, the book has been updated to include more detailed descriptions of new or more commonly used techniques since the last edition as well as remove those that are no longer used, procedures which have been developed recently, ionization constants (pKa values) and also more detail about the trivial names of compounds.In addition to having two general chapters on purification procedures, this book provides details of the physical properties and purification procedures, taken from literature, of a very extensive number of organic, inorganic and biochemical compounds which are commercially available. This is the only complete source that covers the purification of laboratory chemicals that are commercially available in this manner and format.* Complete update of this valuable, well-known reference* Provides purification procedures of commercially available chemicals and biochemicals* Includes an extremely useful compilation of ionisation constants

Have you ever had a discussion with an industrial chemist about the job? Have you ever shadowed a chemist or chemical technician in an industrial or government laboratory for a day? If you have done these things, you were likely surprised at how foreign the language seemed or startled at how unfamiliar the surroundings were. Was there any talk of t

The U.S. Department of State charged the Academies with the task of producing a protocol for development of standard operating procedures (SOPs) that would serve as a complement to the Chemical Laboratory Safety and Security: A Guide to Prudent Chemical Management and be included with the other materials in the 2010 toolkit. To accomplish this task, a committee with experience and knowledge in good chemical safety and security practices in academic and industrial laboratories with awareness of international standards and regulations was formed. The hope is that this toolkit expansion product will enhance the use of the previous reference book and the accompanying toolkit, especially in developing countries where safety resources are scarce and experience of operators and end-users may be limited.