Federal regulations have required thousands of underground storage tanks (USTs) to be dug up and removed or replaced. The contamination of soil and ground water from leaking USTs has become widespread and has produced an overwhelming number of sites that require remediation. Assessment and Remediation of Petroleum Contaminated Sites presents the broad scope of the remedial process from initial site assessment to closure in an integrated, understandable format. The book guides you effortlessly through regulatory requirements, site assessments and sampling, and remediation methods. RCRA and CERCLA federal regulations are addressed. The chemistry and toxicology of petroleum hydrocarbons in the remediation process are explained, and factors affecting soil remediation are discussed. Environmental assessments, site characterizations, remediation planning, and remediation methods are all covered in detail. The book is an essential guide for environmental consultants, regulatory agency personnel, engineers, and environmental attorneys.

The term “total petroleum hydrocarbons” (TPHs) is used for any mixture of several hundred hydrocarbons found in crude oil, and they represent the sum of volatile petroleum hydrocarbons and extractable petroleum hydrocarbons. The petrol-range organics include hydrocarbons from C6 to C10, while diesel-range organics are C10-C28 hydrocarbons. Environmental pollution by petroleum hydrocarbons is one of the major global concerns, particularly in oil-yielding countries. In fact, there are more than five million potentially contaminated areas worldwide that represent, in general, a lost economic opportunity and a threat to the health and well-being of humans and the environment. Petroleum-contaminated sites constitute almost one-third of the total sites polluted with chemicals around the globe. The land contamination caused by industrialization was recognized as early as the 1960s, but less than a tenth of potentially contaminated lands have been remediated due to the nature of the contamination, cost, technical impracticability, and insufficient land legislation and enforcement. This book is the first single source that provides comprehensive information on the different aspects of TPHs, such as sources and range of products, methods of analysis, fate and bioavailability, ecological implications including impact on human health, potential approaches for bioremediation such as risk-based remediation, and regulatory assessment procedures for TPH-contaminated sites. As such, it is a valuable resource for researchers, graduate students, technicians in the oil industry and remediation practitioners, as well as policy makers.

This book serves as a primary textbook for environmental site investigation and remediation of subsurface soil and groundwater. It introduces concepts and principles of field investigative techniques to adequately determine the extent of contamination in the subsurface for the selection of cleanup alternatives. It then focuses on practical calculations and skills needed to design and operate remediation systems that will both educate students and be useful for entry-level professionals in the field. Features: • Examines the practical aspects of investigating and cleaning up contaminated soil and groundwater • Contains scenarios, illustrations, equations, and example problems with discussions that illustrate various practical situations and interpret the results • Includes end-of-chapter problems to reinforce student learning • Provides a regulatory and risk analysis context, as well as public and community involvement aspects • Discusses sustainability and performance assessment of the remediation methods presented Site Assessment and Remediation for Environmental Engineers provides upper-level undergraduate and graduate students with practical, project-oriented knowledge of how to investigate and clean up a site contaminated with chemicals and hazardous waste.

Sustainable Remediation of Contaminated Soil and Groundwater: Materials, Processes, and Assessment provides the remediation tools and techniques necessary for simultaneously saving time and money and maximizing environmental, social and economic benefits. The book integrates green materials, cleaner processes, and sustainability assessment methods for planning, designing and implementing a more effective remediation process for both soil and groundwater projects. With this book in hand, engineers will find a valuable guide to greener remediation materials that render smaller environmental footprint, cleaner processes that minimize secondary environmental impact, and sustainability assessment methods that can be used to guide the development of materials and processes. - Addresses materials, processes, and assessment needs for implementing a successful sustainable remediation process - Provides an integrated approach for the unitization of various green technologies, such as green materials, cleaner processes and sustainability assessment - Includes case studies based on full-scale commercial soil and groundwater remediation projects

These three volumes provide valuable information to help bring rational and scientifically feasible solutions to petroleum contaminated soils. State-of-the-art information on both technical and regulatory issues is covered, including environmental fate, health effects, risk assessment and remedial alternatives. They show why petroleum contaminated soils are a problem - and propose solutions for that problem. These books are an excellent reference for regulatory personnel and environmental consultants at all levels.

Proceedings of the February 19-22, 1990, conference held at Newport Beach, California. Conference Directors: PAUL T. KOSTECKI, EDWARD J. CALABRESE, and CHARLES E. BELL. Advisory Committee: RICHARD BOZEK, EEI; TERRY BRAZEL, SWRCB; MARK COUSINEAU, AG; SETH DAUGHERTY, Orange County; RALPH De La PARRA, SCE; JERRY HAGGY, Shell; JOHN HANBY, HAL; JOHN HILL, ICF; JOHN HILLS, City of Anaheim; DOROTHY KEECH, Chevron; BILL KUCHARSKI, WC; DAVID LEU, Mittel Hauser; MARY McLEARN, EPRI; PHIL OLWIN, Texaco; DENNIS PAUSTENBACH, MC; ART POPE, ARCO; LYNNE PRESLO, Weston; DON ROTHENBAUM, KA; KIM SAVAGE, EPA/OUST; CARL SHUBERT, IT; WENDELL SUYAMA, Lockheed; MICHAEL WANG, WSPA; JOHN WILLIAMS, TT; and WILLIAM WINTERS, AEM.

Recently, environmental scientists have been required to perform a new type of assessment-ecological risk assessment. This is the first book that explains how to perform ecological risk assessments and gives assessors access to the full range of useful data, models, and conceptual approaches they need to perform an accurate assessment. It explains how ecological risk assessment relates to more familiar types of assessments. It also shows how to organize and conduct an ecological risk assessment, including defining the source, selecting endpoints, describing the relevant features of the receiving environment, estimating exposure, estimating effects, characterizing the risks, and interacting with the risk manager. Specific technical topics include finding and selecting toxicity data; statistical and mathematical models of effects on organisms, populations, and ecosystems; estimation of chemical fate parameters; modeling of chemical transport and fate; estimation of chemical uptake by organisms; and estimation, propagation, and presentation of uncertainty. Ecological Risk Assessment also covers conventional risk assessments, risk assessments for existing contamination, large scale problems, exotic organisms, and risk assessments based on environmental monitoring. Environmental assessors at regulatory agencies, consulting firms, industry, and government labs need this book for its approaches and methods for ecological risk assessment. Professors in ecology and other environmental sciences will find the book's practical preparation useful for classroom instruction. Environmental toxicologists and chemists will appreciate the discussion of the utility for risk assessment of particular toxicity tests and chemical determinations.