This practical guide starts with a survey of the types of site and the asphalt properties which are required. Various external influences which may affect the relative importance of some properties are addressed, and the interplay of sites and external is considered. Asphalt mixture types and their properties are reviewed, largely as defined in the EN 13108 series but subdivided into further categories, and into maximum nominal coarse aggregate sizes using EN 13043 basic set plus set 2 sizes. Guidance is given, including using flowcharts, of the different mixtures that are suitable for each situation. In some cases a range of choices or mixtures with different degrees of suitability is offered. The guidance covers surface course, binder course and base, but with more focus on the surface course where the external influence is most significant. The site and external influence combinations on which a mixture can be used successfully are also given. The book is primarily intended for those who select asphalt on an occasional basis, such as architects or housing developers, but could be of use to other engineers with limited experience. It is also useful as an educational textbook for those studying asphalt technology.

Asphalt is a complex but popular civil engineering material. Design engineers must understand these complexities in order to optimize its use. Whether or not it is used to pave a busy highway, waterproof a rooftop or smooth out an airport runway, Asphalt Materials Science and Technology acquaints engineers with the issues and technologies surrounding the proper selection and uses of asphalts. With this book in hand, researchers and engineering will find a valuable guide to the production, use and environmental aspect of asphalt. - Covers the Nomenclature and Terminology for Asphalt including: Performance Graded (PG) Binders, Asphalt Cement (AC), Asphalt-Rubber (A-R) Binder, Asphalt Emulsion and Cutback Asphalt - Includes Material Selection Considerations, Testing, and applications - Biodegradation of Asphalt and environmental aspects of asphalt use

Asphalt Surfacings has been written as a reference to the various asphalt course materials and surfacing treatments that are currently available to engineers, enabling them to select the materials and/or treatment that are appropriate for use on specific sites. Appropriate reference is made to the lower structural layers as the properties of all layers interact in producing the required pavement. The current established position in the UK and the emerging developments throughout the UK and Europe are covered. The contributors are all acknowledged authorities on their particular topics selected from every part of the highway engineering industry to achieve a balance between the various approaches required by the different functions they perform.