Results from simulation show the rigid fiber in simple shear flow produces a good agreement for orientation of a fiber relative to the theoretical study by Jeffery (1922). The flexible fiber exhibits an increase on the rotational period from the rigid fiber due to more deformation shape is revealed during rotation. The simulation technique demonstrates the ability to simulate fiber-fiber interactions to further study of relative viscosity of suspensions in shear flow. Simulation results show that fiber orientation and relative viscosity depend on the fiber characteristics (fiber aspect ratio, fiber flexibility, and volume fraction). The results are verified against known experimental measurements and theoretical results.

Determination of the relation between the bulk or rheological properties of a particle suspension and its microscopic structure is an old and important problem in physical science. In general, the rheology of particle suspension is quite complex, and the problem becomes even more complicated if the suspending particle is deformable. Despite these difficulties, a large number of theoretical and experimental investigations have been devoted to the analysis and prediction of the rheological behavior of particle suspensions. However, among these studies there are very few investigations that focus on the role of particle deformability. A novel method for full coupling of the fluid-solid phases with sub-grid accuracy for the solid phase is developed. In this method, the flow is computed on a fixed regular 'lattice' using the lattice Boltzmann method (LBM), where each solid particle, or fiber, is mapped onto a Lagrangian frame moving continuously through the domain. The motion and orientation of the particle are obtained from Newtonian dynamics equations. The deformable particle is modeled by the lattice-spring model (LSM). The fiber deformation is calculated by an efficient flexible fiber model. The no-slip boundary condition at the fluid-solid interface is based on the external boundary force (EBF) method. This method is validated by comparing with known experimental and theoretical results.

Colloids are ubiquitous in the food, medical, cosmetics, polymers, water purification, and pharmaceutical industries. The thermal, mechanical, and storage properties of colloids are highly dependent on their interface morphology and their rheological behavior. Numerical methods provide a convenient and reliable tool for the study of colloids. Accelerated Lattice Boltzmann Model for Colloidal Suspensions introduce the main building-blocks for an improved lattice Boltzmann–based numerical tool designed for the study of colloidal rheology and interface morphology. This book also covers the migrating multi-block used to simulate single component, multi-component, multiphase, and single component multiphase flows and their validation by experimental, numerical, and analytical solutions. Among other topics discussed are the hybrid lattice Boltzmann method (LBM) for surfactant-covered droplets; biological suspensions such as blood; used in conjunction with the suppression of coalescence for investigating the rheology of colloids and microvasculature blood flow. The presented LBM model provides a flexible numerical platform consisting of various modules that could be used separately or in combination for the study of a variety of colloids and biological flow deformation problems.

This research is a thorough numerical investigation and critical analysis of lateral migration of a deformable particle settling in a vertical weak shear flow. Under the vertical weak shear fluid, the deformable particle may move either to the coagulation area, or the dispersion area, depending on Reynolds numbers, shear Reynolds number, fiber flexibility, and aspect ratio. In this study, a lattice Boltzmann equation is used to solve Navier-Stokes equation and a flexible particle method is employed to attack the problem of motion of a flexible fiber. A bounce-back rule is used to deal with moving boundaries interacting with fluids. Several simulations are first conducted at the same shear Reynolds number, particle settling Reynolds number and aspect ratio except that the rigidity is varied at different levels. It is found that the rigidity plays a critical role, may change particle lateral migration direction, either migrate toward a coagulation area, or toward a dispersion area, depending the value of the rigidity. It shows that the rigidity may alter the fiber inertia, in turn, convert coagulation to dispersion. In other words, flexibility may alter the stability of fiber suspension. At a low settling Reynolds number, as the vertical shear flow increases the fiber dispersion trend increases and the lower rigid fiber has a larger tendency to disperse.

Issues in Mechanical Engineering / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Mechanical Engineering. The editors have built Issues in Mechanical Engineering: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Mechanical Engineering in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Mechanical Engineering: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Particle suspensions are common both in nature and in various technological applications. The complex nature of hydrodynamic interactions between particles and the solvent makes such analysis difficult that often requires numerical modeling to understand the behavior of particle suspensions. In this dissertation, we employ a hybrid computational model that integrates a lattice spring model for solid mechanics and a lattice Boltzmann model for fluid dynamics. We use this model to study several practical problems in which the dynamics of spherical and spheroidal particles and deformable capsules in dilute suspensions plays an important role. The results of our studies yield new information regarding the dynamics of solid particle in pressure-driven channel flows and disclose the nonlinear effects associated with fluid inertia leading to particle cross-stream migration. This information not only give us a fundamental insight into the dynamics of dilute suspensions, but also yield engineering guidelines for designing high throughput microfluidic devices for sorting and separation of synthetic particles and biological cells. We first demonstrate that spherical particles can be size-separated in ridged microchannels. Specifically, particles with different sizes follow distinct trajectories as a result of the nonlinear inertial effects and secondary flows created by diagonal ridges in the channel. Then, separation of biological cells by their differential stiffness is studied and compared with experimental results. Cells with different stiffness squeeze through narrow gaps between solid diagonal ridges and channel wall, and migrate across the microchannel with different rates depending on their stiffness. This deformability-based microfluidic platform may be valuable for separating diseased cells from healthy cells, as a variety of cell pathologies manifest through the change in mechanical cell stiffness. Finally, the dynamics of spheroid particles in simple shear and Poiseuille flows are studied. Stable rotational motion, cross-stream migration, and equilibrium trajectories of non-spherical particles in flow are investigated. Effects of particle and fluid inertia on dynamics of particles are disclosed. The dependence of equilibrium trajectory on particle shape reveals a potential application for shape based particle separation.

The Multiphase Flow Handbook, Second Edition is a thoroughly updated and reorganized revision of the late Clayton Crowe’s work, and provides a detailed look at the basic concepts and the wide range of applications in this important area of thermal/fluids engineering. Revised by the new editors, Efstathios E. (Stathis) Michaelides and John D. Schwarzkopf, the new Second Edition begins with two chapters covering fundamental concepts and methods that pertain to all the types and applications of multiphase flow. The remaining chapters cover the applications and engineering systems that are relevant to all the types of multiphase flow and heat transfer. The twenty-one chapters and several sections of the book include the basic science as well as the contemporary engineering and technological applications of multiphase flow in a comprehensive way that is easy to follow and be understood. The editors created a common set of nomenclature that is used throughout the book, allowing readers to easily compare fundamental theory with currently developing concepts and applications. With contributed chapters from sixty-two leading experts around the world, the Multiphase Flow Handbook, Second Edition is an essential reference for all researchers, academics and engineers working with complex thermal and fluid systems.