This book focusses on III-V high electron mobility transistors (HEMTs) including basic physics, material used, fabrications details, modeling, simulation, and other important aspects. It initiates by describing principle of operation, material systems and material technologies followed by description of the structure, I-V characteristics, modeling of DC and RF parameters of AlGaN/GaN HEMTs. The book also provides information about source/drain engineering, gate engineering and channel engineering techniques used to improve the DC-RF and breakdown performance of HEMTs. Finally, the book also highlights the importance of metal oxide semiconductor high electron mobility transistors (MOS-HEMT). Key Features Combines III-As/P/N HEMTs with reliability and current status in single volume Includes AC/DC modelling and (sub)millimeter wave devices with reliability analysis Covers all theoretical and experimental aspects of HEMTs Discusses AlGaN/GaN transistors Presents DC, RF and breakdown characteristics of HEMTs on various material systems using graphs and plots

The topic of this monograph is the physical modeling of heterostructure devices. A detailed discussion of physical models and parameters for compound semiconductors is presented including the relevant aspects of modern submicron heterostructure devices. More than 25 simulation examples for different types of Si(Ge)-based, GaAs-based, InP-based, and GaN-based heterostructure bipolar transistors (HBTs) and high electron mobility transistors (HEMTs) are given in comparison with experimental data from state-of-the-art devices.

This thesis deals with the analysis and optimization of some of the most prominent non-ideal effects in AlGaN/GaN high electron mobility transistors used in microwave applications as well as the optimization of the RF gain. The effect of current collapse, the root cause of leakage currents as well as field-dependent self-heating effects have been investigated by eletrical characterization using well established techniques and have been analyzed using 2-dimensional physical device simulations. It will be shown that the origin of all effects is strongly related to the device surface and some are even competing effects making device optimization a challenge. However, a detailed localization of the regions affecting device performance will be given leading to a better understanding for fabrication process optimization. Finally, I simulation study is conducted giving suggestions for RF gain improvement based on very simple device layout variations.

In this work, the insight provided by our sophisticated Full Band Monte Carlo simulator is used to analyze the behavior of state-of-art devices like GaN High Electron Mobility Transistors and Hot Electron Transistors. Chapter 1 is dedicated to the description of the simulation tool used to obtain the results shown in this work. Moreover, a separate section is dedicated the set up of a procedure to validate to the tunneling algorithm recently implemented in the simulator. Chapter 2 introduces High Electron Mobility Transistors (HEMTs), state-of-art devices characterized by highly non linear transport phenomena that require the use of advanced simulation methods. The techniques for device modeling are described applied to a recent GaN-HEMT, and they are validated with experimental measurements. The main techniques characterization techniques are also described, including the original contribution provided by this work. Chapter 3 focuses on a popular technique to enhance HEMTs performance: the down-scaling of the device dimensions. In particular, this chapter is dedicated to lateral scaling and the calculation of a limiting cutoff frequency for a device of vanishing length. Finally, Chapter 4 and Chapter 5 describe the modeling of Hot Electron Transistors (HETs). The simulation approach is validated by matching the current characteristics with the experimental one before variations of the layouts are proposed to increase the current gain to values suitable for amplification. The frequency response of these layouts is calculated, and modeled by a small signal circuit. For this purpose, a method to directly calculate the capacitance is developed which provides a graphical picture of the capacitative phenomena that limit the frequency response in devices. In Chapter 5 the properties of the hot electrons are investigated for different injection energies, which are obtained by changing the layout of the emitter barrier. Moreover, the large signal characterization of the HET is shown for different layouts, where the collector barrier was scaled.

In this thesis, we have used a combination of physical analysis, numerical simulation and experimental work to identify and overcome some of the main challenges in AlGaN/GaN high electron mobility transistors (HEMTs) for high frequency applications. In spite of their excellent material properties, GaN-based HEMTs are still below the theoretical predictions in their high frequency performance. If the frequency performance could be improved, the superior breakdown characteristics of nitride semiconductors would make these devices the best option for power amplifiers at any frequency. To achieve this goal, we have first identified some critical parameters that limit the high frequency performance of AlGaN/GaN HEMTs and then we have demonstrated several new technologies to increase the performance. Some of these technologies include advanced drain delay engineering, charge control in the channel and new N-face GaN HEMTs. Although more work is needed in the future to combine all these new technologies, the initial results are extremely promising.