A recording apparatus suitable for thermal and differential thermal analysis was developed. It can be used to obtain data for phase diagram investigations on small samples of rare metals and their alloys at temperatures up to 1500 C. The thermal analysis apparatus consists of a platinum wound resistance furnace with protective atmos phere provisions and a Pt/Pt 13% Rh thermo couple as sensor which feeds a one mV strip chart recorder. A bucking potentiometer used in series with the thermocouple permits a temperature reso lution of better than 0.5 C. For differential thermal analysis, an additional 100 microvolt strip chart recorder is used. The heating or cooling rate can be varied between 0.5 C/min and approximately 15 C/minute. The thermal analysis apparatus was calibrated at several fixed points and has an overall accuracy of =1.5 C. (Author).

At first glance it may seem presumptuous to want to add yet another to the numerous books on Differential Thermal Analysis (DT A). Thermoanalytical methods have been in use for some time, as shown by the more than five thousand publications containing DT A or TG curves listed by SMOTHERS and CHIANG in the bibliography to their handbook and abstracted in the several volumes of Thermal Analysis Abstracts (TAA), edited by J. P. REDFERN for the International Con federation for Thermal Analysis (ICT A). Every three years the proceed ings of ICT A meetings are published, bringing the latest results of thermoanalytic research. There is also the Scifax DT A Data Index, edited by R. C. MACKENZIE (1962) and modeled on the ASTM pattern card index (used for X-ray investigations), a compilation of the DT A data for several hundred minerals, and inorganic and organic materials. The theoretical foundations of thermogravimetry and DT A have been described in detail by LEHMANN, DAS and PAETSCH (1953), R. C. MACKENZIE (1957, 1970), DUVAL (1963), WENDLANDT (1964), GARN (1965), F. PAULIK et al. (1966), SMOTHERS and CHIANG (1966), and KEATTCH (1969). Thermoanalytical results are strongly influenced by various factors relative to preparation and equipment (see 1-2. 4 of this study). This is the reason why we frequently find, in these books as well as in the Scifax-Card catalog, contradictory data on the same substance.

to Thermal Analysis Techniques and Applications Edited by Michael E. Brown Chemistry Department, Rhodes University, Grahamstown, South Africa KLUWER ACADEMIC PUBLISHERS NEW YORK, BOSTON, DORDRECHT, LONDON, MOSCOW eBook ISBN: 0-306-48404-8 Print ISBN: 1-4020-0472-9 ©2004 Kluwer Academic Publishers New York, Boston, Dordrecht, London, Moscow Print ©2001 Kluwer Academic Publishers Dordrecht All rights reserved No part of this eBook may be reproduced or transmitted in any form or by any means, electronic, mechanical, recording, or otherwise, without written consent from the Publisher Created in the United States of America Visit Kluwer Online at: http://kluweronline. com and Kluwer's eBookstore at: http://ebooks. kluweronline. com CONTENTS Preface to the First Edition, Chapman & Hall, London, 1988 ix About the First Edition of this Book x Preface to the Second Edition xi 1. INTRODUCTION 1. 1 Definition and History 1 1. 2 Thermal Analysis Instruments 4 References 11 2. THERMAL EVENTS 2. 1 Introduction 13 2. 2 The Solid State 13 2. 3 Reactions of Solids 14 2. 4 Decomposition of Solids 15 2. 5 Reaction with the Surrounding Atmosphere 16 2. 6 Solid-Solid Interactions 16 References 17 3. THERMOGRAVIMETRY (TG) Introduction 3. 1 19 3. 2 The Balance 19 3. 3 Heating the Sample 21 3. 4 The Atmosphere 24 3. 5 The Sample 26 3. 6 Temperature Measurement 26 3. 7 Temperature Control 28 Sample Controlled Thermal Analysis (SCTA) 29 3. 8 3. 9 Calibration 36 3. 10 Presentation of TG Data 37 3.

Thermal Analysis: From Introductory Fundamentals to Advanced Applications presents an easy-to-understand introduction to Thermal Analysis (TA) principles alongside in-depth coverage of the wide variety of techniques currently in use across several industries. It covers differential scanning calorimetry (DSC), temperature modulated DSC (TMDSC), differential thermal analysis (DTA), thermogravimetry (TG) or thermogravimetric analysis (TGA), thermomechanical analysis (TMA), differential photo-calorimetry (DPC), dynamic mechanical analysis (DMA), thermodilatometry (TD), dielectric thermal analysis (DEA), thermally-stimulated current (TSC), emanation thermal analysis (ETA), thermoluminescence (TL), fast scanning calorimetry (FSC), and microcalorimetry. Chapters define the various TA techniques, report the Temperature-Modulated DSC (TMDSC) method and its applications, especially its use for studying the thermodynamic properties of polymers and pharmaceuticals, focus on the potential of TA in materials science with applications in chemistry and engineering, demonstrate, in detail, the various applications of TA in food, electronic industries, solid-state reactions, chemistry of polymers and large directing agents, kinetic studies, demonstrate the crystal structure and phase changes occurring upon heating by TA, and the potential of TA in recycling and waste management. - Gives a solid introduction to the scientific principles of TA for those who are new to these techniques or need a deeper understanding - Illustrates concepts with more than 100 schematic and analysis curves, several flow charts, process diagrams and photographs - Contains chapters that cover the user of TA in materials science and crystal structures