The main tasks of the cadmium telluride portion of this project include the development of simplified processing for fabricating high-efficiency CdTe solar cells, studies on the long-term stability of CdTe devices, and the development of alternative transparent conducting oxides, window layers, and back contacts. The second portion of this project focused on CIGS solar cells. The main tasksinclude the development of a manufacturable process for CIGS devices and the development of high-band-gap alloys for use in tandem cell structures. Additional objectives include development of improved junction formation processing and contributing to the overall understanding of these materials and devices. Because our processing is manufacturing-driven, we use an all solid-state, simplifiedtwo-step process that relaxes the level of deposition control required.

This report summarizes work performed by the University of South Florida Department of Electrical Engineering under this subcontract. The Cadmium telluride(CdTe) portion of this project deals with the development of high-efficiency thin-filmed CdTe solar cells using fabrication techniques that are suitable for manufacturing environments.

The main tasks of the cadmium telluride portion of this project include the development of simplified processing for fabricating high-efficiency CdTe solar cells, studies on the long-term stability of CdTe devices, and the development of alternative transparent conducting oxides, window layers, and back contacts. The second portion of this project focused on CIGS solar cells. The main tasks include the development of a manufacturable process for CIGS devices and the development of high-band-gap alloys for use in tandem cell structures. Additional objectives include development of improved junction formation processing and contributing to the overall understanding of these materials and devices. Because the processing is manufacturing-driven, the authors use an all solid-state, simplified two-step process that relaxes the level of deposition control required.

The main tasks of the cadmium telluride portion of this project include the development of simplified processing for fabricating high-efficiency CdTe solar cells, studies on the long-term stability of CdTe devices, and the development of alternative transparent conducting oxides, window layers, and back contacts. The second portion of this project focused on CIGS solar cells. The main tasks include the development of a manufacturable process for CIGS devices and the development of high-band-gap alloys for use in tandem cell structures. Additional objectives include development of improved junction formation processing and contributing to the overall understanding of these materials and devices. Because the processing is manufacturing-driven, the authors use an all solid-state, simplified two-step process that relaxes the level of deposition control required.

The main objective of this project is to develop high-efficiency CdTe solar cells based on processing conditions favorable for manufacturing processes. This report presents the results on work performed during the first phase of this project. One of the major issues addressed is the use of soda-lime glass substrates in place of the borosilicate glass often used for laboratory devices; anothertask is the preparation of Cu(In,Ga) Se2 solar cells by selenizing suitable precursor films. Emphasis is placed on processing and how different reaction schemes affect device performance. It was found that different reaction schemes not only change the bulk properties of Cu(In,Ga)Se2, but also its surface properties, which critically affect device performance. Although the objective is tooptimize processing to meet the manufacturing constraints, work has not been limited within these requirements.;