A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.

A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.

Mikro- und Nanotechnik haben Wissenschaft und Forschung revolutioniert. In Zukunft werden sie auch den Alltag verändern. Nun liegt der erste Band einer neuen Buchreihe vor: Advanced Micro and Nano Systems 1. Henry Baltes und seine Co-Autoren knüpfen mit AMN an die Sensors Update-Reihe an. Das Autorenteam wurde um weitere Experten erweitert. AMN wird zwei Mal pro Jahr mit einem neuen Band die aktuellen Entwicklungen in der Mikro- und Nano-Welt begleiten. Die Erforschung und der Einsatz von Mikro- und Nanosystemen sind eines der brandaktuellen Themen im Wissenschaftsbereich. Die Forschungsergebnisse werden mehr und mehr auch konkret umgesetzt. Damit werden Mikro- und Nanotechnologie zu Wirtschaftsfaktoren. Aktuelle Entwicklungen, neue Technologien, Nano-Bauelemente und Systeme im Mikromaßstab - Advanced Micro and Nano Systems, die neue Buchreihe, wird Spiegel der spannenden und faszinierenden Mikro- und Nano-Welt sein. Zweimal pro Jahr wird es einen neuen AMN-Band geben. Die Autoren sind ausgewiesene Spezialisten. Zu den Herausgebern zählt Henry Baltes, Professor an der ETH Zürich. Er zeichnete bereits für die Bände der Sensors Update-Reihe verantwortlich. Die Artikel ermöglichen Neueinsteigern einen ersten Zugriff auf die Materie. Fachleute erhalten einen umfassenden Überblick. Anspruch der Herausgeber ist es, nicht nur die theoretischen Grundlagen von Mikro- und Nanosystemen zu reflektieren, sondern immer auch praktische Möglichkeiten und die Grenzen der Anwendung im Blick zu haben. Die AMN-Bände sind Handbücher und Nachschlagewerke in einem. Die Reihe richtet sich an Vertreter unterschiedlicher Fachrichtungen: Biologie, Chemie, Mathematik, Sensorindustrie und Materialwissenschaften.

Advanced Piezoelectric Materials: Science and Technology, Second Edition, provides revised, expanded, and updated content suitable for those researching piezoelectric materials or using them to develop new devices in areas such as microelectronics, optical, sound, structural, and biomedical engineering. Three new chapters cover multilayer technologies with base-metal internal electrodes, templated grain growth preparation techniques for manufacturing piezoelectric single crystals, and piezoelectric MEMS technologies. Chapters from the first edition have been revised in order to provide up-to-date, comprehensive coverage of developments in the field. Part One covers the structure and properties of a range of piezoelectric materials. Part Two details advanced manufacturing processes for particular materials and device types, including three new chapters. Finally, Part Three covers materials development for three key applications of piezoelectric materials. Dr. Kenji Uchino is a pioneer in piezoelectric actuators, Professor of Electrical Engineering at Penn State University, and Director of the International Center for Actuators and Transducers. He has authored 550 papers, 54 books and 26 patents in the ceramic actuator area. Features an overview of manufacturing methods for a wide range of piezoelectric materials Provides revised, expanded, and updated coverage compared to the first edition, including three new chapters Suitable for those researching piezoelectric materials or using them to develop new devices in areas such as microelectronics, optical, sound, structural, and biomedical engineering

In Optical Nano and Micro Actuator Technology, leading engineers, material scientists, chemists, physicists, laser scientists, and manufacturing specialists offer an in-depth, wide-ranging look at the fundamental and unique characteristics of light-driven optical actuators. They discuss how light can initiate physical movement and control a variety of mechanisms that perform mechanical work at the micro- and nanoscale. The book begins with the scientific background necessary for understanding light-driven systems, discussing the nature of light and the interaction between light and NEMS/MEMS devices. It then covers innovative optical actuator technologies that have been developed for many applications. The book examines photoresponsive materials that enable the design of optically driven structures and mechanisms and describes specific light-driven technologies that permit the manipulation of micro- and nanoscale objects. It also explores applications in optofluidics, bioMEMS and biophotonics, medical device design, and micromachine control. Inspiring the next generation of scientists and engineers to advance light-driven technologies, this book gives readers a solid grounding in this emerging interdisciplinary area. It thoroughly explains the scientific language and fundamental principles, provides a holistic view of optical nano and micro actuator systems, and illustrates current and potential applications of light-driven systems.

Nanomaterials for Sensing and Optoelectronic Applications explores recent trends in nanomaterials and devices for chemical and biosensing applications. The synthesis, properties and applications of metal oxide nanostructures, as well as two-dimensional layered materials are covered, along with the fabrication of optoelectronic devices, such as chemical sensors, biosensors, core-shell nanostructures-based surface-enhanced Raman spectroscopy (SERS) substrates, luminescent nanoparticles, memory devices, and thin film transistors. Aiming at researchers in these respective areas, the fundamental principles and mechanisms of the optoelectronic phenomena behind every application mentioned are covered and comprehensively explored. The book will be helpful in solving problems related to the synthesis and growth of various nanostructures, the application of these materials for various devices, and to understand how a specific synthesis route promotes a specific application. Outlines the fundamental principles and mechanisms behind chemical sensing, bio-sensing, thin film transistor devices, and memory devices Offers a detailed description on the synthesis of 2D materials and oxide nanostructures, with thin films included Assesses the major properties of nanomaterials that make them good sensing agents

The International Symposium for Testing and Failure Analysis (ISTFA) 2018 is co-located with the International Test Conference (ITC) 2018, October 28 to November 1, in Phoenix, Arizona, USA at the Phoenix Convention Center. The theme for the November 2018 conference is "Failures Worth Analyzing." While technology advances fast and the market demands the latest and the greatest, successful companies strive to stay competitive and remain profitable.