Adhesive bonding has been used in the manufacture of primary aircraft fuselage and wing structures by various constructors since 1945. By a proper design, adhesive bonding often helps in designing structures mechanically equivalent to or even stronger than conventional assemblies. Adhesive Joining of Structural Components: New Insights and Technologies introduces the reader to some recent progress involved in adhesive joining of structural components. The chapters, seminal SAE International technical papers, cover the most recent advances in adhesive materials, surface preparation and controls, innovative bonding technologies, hybrid bonded/bolted joints, non-destructive testing and failure modelling of adhesively bonded joints. Edited by Dr. Alessandro Pegoretti, Professor of Materials Science and Technology at the University of Trento, Italy, Adhesive Joining of Structural Components: New Insights and Technologies is a must-read resource for those interested in the field of adhesive joining of structural components, which will assume an increasingly important role in designing and manufacturing lightweight structures. In fact, recent advancements in adhesives, methods for surface preparation and control, bonding technologies, non-destructive testing and modelling of failure mechanisms will certainly contribute to revitalize this relatively "mature" assembling technique.

This book is open access under a CC BY 4.0 license. It presents the results of the ComBoNDT European project, which aimed at the development of more secure, time- and cost-saving extended non-destructive inspection tools for carbon fiber reinforced plastics, adhered surfaces and bonded joints. The book reports the optimal use of composite materials to allow weight savings, reduction in fuel consumptions, savings during production and higher cost efficiency for ground operations.

The availability of efficient and cost-effective technologies to repair or extend the life of aging military airframes is becoming a critical requirement in most countries around the world, as new aircraft becoming prohibitively expensive and defence budgets shrink. To a lesser extent a similar situation is arising with civil aircraft, with falling revenues and the high cost of replacement aircraft.This book looks at repair/reinforcement technology, which is based on the use of adhesively bonded fibre composite patches or doublers and can provide cost-effective life extension in many situations. From the scientific and engineering viewpoint, whilst simple in concept, this technology can be quite challenging particularly when used to repair primary structure. This is due to it being based on interrelated inputs from the fields of aircraft design, solid mechanics, fibre composites, structural adhesive bonding, fracture mechanics and metal fatigue. The technologies of non-destructive inspection (NDI) and, more recently smart materials, are also included. Operational issues are equally critical, including airworthiness certification, application technology (including health and safety issues), and training.Including contributions from leading experts in Canada, UK, USA and Australia, this book discusses most of these issues and the latest developments. Most importantly, it contains real histories of application of this technology to both military and civil aircraft.

This book addresses the emerging needs of the aerospace industry by discussing recent developments and future trends of aeronautic materials. It is aimed at advancing existing materials and fostering the ability to develop novel materials with less weight, increased mechanical properties, more functionality, diverse manufacturing methods, and recyclability. The development of novel materials and multifunctional materials has helped to increase efficiency and safety, reduce costs, and decrease the environmental foot print of the aeronautical industry. In this book, integral metallic structures designed by disruptive concepts, including topology optimization and additive manufacturing, are highlighted.

A comprehensive introduction to the concepts of joining technologies for hybrid structures This book introduces the concepts of joining technology for polymer-metal hybrid structures by addressing current and new joining methods. This is achieved by using a balanced approach focusing on the scientific features (structural, physical, chemical, and metallurgical/polymer science phenomena) and engineering properties (mechanical performance, design, applications, etc.) of the currently available and new joining processes. It covers such topics as mechanical fastening, adhesive bonding, advanced joining methods, and statistical analysis in joining technology. Joining of Polymer-Metal Hybrid Structures: Principles and Applications is structured by joining principles, in adhesion-based, mechanical fastened, and direct-assembly methods. The book discusses such recent technologies as friction riveting, friction spot joining and ultrasonic joining. This is used for applications where the original base material characteristics must remain unchanged. Additional sections cover the main principles of statistical analysis in joining technology (illustrated with examples from the field of polymer-metal joining). Joining methods discussed include mechanical fastening (bolting, screwing, riveting, hinges, and fits of polymers and composites), adhesive bonding, and other advanced joining methods (friction staking, laser welding, induction welding, etc.). Provides a combined engineering and scientific approach used to describe principles, properties, and applications of polymer-metal hybrid joints Describes the current developments in design of experiments and statistical analysis in joining technology with emphasis on joining of polymer-metal hybrid structures Covers recent innovations in joining technology of polymer-metal hybrid joints including friction riveting, friction spot joining, friction staking, and ultrasonic joining Principles illustrated by pictures, 3D-schemes, charts, and drawings using examples from the field of polymer-metal joining Joining of Polymer-Metal Hybrid Structures: Principles and Applications will appeal to chemical, polymer, materials, metallurgical, composites, mechanical, process, product, and welding engineers, scientists and students, technicians, and joining process professionals.

Bonded composite repairs are efficient and cost effective means of repairing cracks and corrosion grind-out cavity in metallic structures, and composite structures sustained impact and ballistic damages, especially in aircraft structures. This book grew out of the recent research conducted at the Boeing Company and the Defence Science and Technology Organisation (DSTO, Australia) over the past ten years. Consequently it is predominately a compilation of the work by the authors and their colleagues at these two organizations on the design and analysis of composite repairs. Composite Repair is entirely devoted to the design and analysis of bonded repairs, focusing on the mathematical techniques and analysis approaches that are critical to the successful implementation of bonded repairs. The topics addressed are presentated in a sufficiently self-explanatory manner, and serve as a state-of-the-art reference guide to engineers, scientists, researchers and practitioners interested in the underpinning design methodology and the modelling of composite repairs. - The only book devoted entirely to the design and analysis of bonded repairs - Focusing on mathematical techniques and analytical methodologies that are critical to the successful implementation of bonded repair - A companion reference book to the United Stated Air Force (USAF) bonded repair guidelines (Guidelines for Composite Repair of Metallic Structures-CRMS, AFRL-WP-TR-1998-4113) and the Royal Australian Air Force (RAAF) Design Standard DEF(AUST)995 - Covering a variety of topics and effects: repairs of fatigue and sonic fatigue cracks, and corrosion grind-out cavity, and effects of secondary bending, octagon-shaped patches, thermal residual stresses, patches in proximity, patch tapering edge, etc.