This workbook is a practical companion to the second edition of the textbook Reservoir Stimulation. The two books are intended to be used together. This new volume should be particularly useful for the training of new engineers and petroleum engineering students, as it contains approximately 100 problems and their solutions, plus a lengthy chapter giving data necessary for designing a stimulation treatment. Chapters are included containing practical problems on reservoir and well considerations, rock mechanics, fracturing fluids and proppants, fracture calibration treatments, design and modeling of propped fractures, evaluation of fracture treatments, design of matrix treatments, diversion and treatment evaluation, design and performance of acid fractures and stimulation of horizontal wells. These chapters are labeled with letters from A to J to distinguish them from their companion chapters in Reservoir Stimulation. Equations, figures and tables from the textbook are referred to in the workbook but are not reproduced.

This revised edition of the bestselling Practice of Reservoir Engineering has been written for those in the oil industry requiring a working knowledge of how the complex subject of hydrocarbon reservoir engineering can be applied in the field in a practical manner. Containing additions and corrections to the first edition, the book is a simple statement of how to do the job and is particularly suitable for reservoir/production engineers as well as those associated with hydrocarbon recovery.This practical book approaches the basic limitations of reservoir engineering with the basic tenet of science: Occam's Razor, which applies to reservoir engineering to a greater extent than for most physical sciences - if there are two ways to account for a physical phenomenon, it is the simpler that is the more useful. Therefore, simplicity is the theme of this volume.Reservoir and production engineers, geoscientists, petrophysicists, and those involved in the management of oil and gas fields will want this edition.

The Practice of Reservoir Engineering has been written for those in the oil industry requiring a working knowledge of how the complex subject of hydrocarbon reservoir engineering can be applied in the field in a practical manner. The book is a simple statement of how to do the job and is particularly suitable for reservoir/production engineers and is illustrated with 27 examples and exercises based mainly on actual field developments. It will also be useful for those associated with the subject of hydrocarbon recovery. Geoscientists, petrophysicists and those involved in the management of oil and gas fields will also find it particularly relevant.The new http://www.elsevier.nl/locate/isbn/0444506705 Practice of Reservoir Engineering Revised Edition will be available soon.

Casing design has followed an evolutionary trend and most improvements have been made due to the advancement of technology. Contributions to the technology in casing design have come from fundamental research and field tests, which have made casing safe and economical. This book gathers together much available information in the subject area and shows how it may be used in deciding the best procedure for casing design i.e. optimizing casing design for deriving maximum profit from a particular well. The problems and their solutions, which are provided in each chapter, and the computer program (3.5 in. disk) are intended to serve two purposes:- firstly, as illustrations for students and practicing engineers to understand the subject matter, and secondly, to enable them to optimize casing design for a wide range of wells to be drilled in the future.

This second volume on carbonate reservoirs completes the two-volume treatise on this important topic for petroleum engineers and geologists. Together, the volumes form a complete, modern reference to the properties and production behaviour of carbonate petroleum reservoirs.The book contains valuable glossaries to geologic and petroleum engineering terms providing exact definitions for writers and speakers. Lecturers will find a useful appendix devoted to questions and problems that can be used for teaching assignments as well as a guide for lecture development. In addition, there is a chapter devoted to core analysis of carbonate rocks which is ideal for laboratory instruction.Managers and production engineers will find a review of the latest laboratory technology for carbonate formation evaluation in the chapter on core analysis. The modern classification of carbonate rocks is presented with petroleum production performance and overall characterization using seismic and well test analyses. Separate chapters are devoted to the important naturally fractured and chalk reservoirs.Throughout the book, the emphasis is on formation evaluation and performance.This two-volume work brings together the wide variety of approaches to the study of carbonate reservoirs and will therefore be of value to managers, engineers, geologists and lecturers.

This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.

The purpose of Applied Geothermics for Petroleum Engineers is to present in a clear and concise form methods of utilizing the data of temperature surveys in deep boreholes as well as the results of field, laboratory and analytical investigations in geothermics to a wide audience. Although some aspects of the subject of this book have been discussed in several previous books and numerous papers, Applied Geothermics for Petroleum Engineers is the first book on this topic available to the petroleum engineering community.The objective of the book is to present the state of knowledge and prediction of downhole and formations temperatures during well drilling, well completion, shut-in and production.Applied Geothermics for Petroleum Engineers is intended for drilling engineers (impact of elevated temperatures on well drilling and completion technology, Arctic drilling), production engineers (temperature regime of production, injection and geothermal walls, Arctic production), reservoir engineers (temperature field of reservoirs, thermal properties of formations and formation fluids), well logging engineers (interpretation of electrical resistance, mud density, and temperature logs), and geophysicists and geologists (interpretation of geophysical data, calculation of the terrestrial heat flow, reconstruction of past climates).