The theme for the 2019 conference is Novel Computing Architectures. Papers will include discussions on the advent of Artificial Intelligence and the promise of quantum computing that are driving disruptive computing architectures; Neuromorphic chip designs on one hand, and Quantum Bits on the other, still in R&D, will introduce new computing circuitry and memory elements, novel materials, and different test methodologies. These novel computing architectures will require further innovation which is best achieved through a collaborative Failure Analysis community composed of chip manufacturers, tool vendors, and universities.

The International Symposium for Testing and Failure Analysis (ISTFA) 2018 is co-located with the International Test Conference (ITC) 2018, October 28 to November 1, in Phoenix, Arizona, USA at the Phoenix Convention Center. The theme for the November 2018 conference is "Failures Worth Analyzing." While technology advances fast and the market demands the latest and the greatest, successful companies strive to stay competitive and remain profitable.

We are delighted to provide the proceedings of the sixth International Conference on Applied Engineering (ICAE), 2023, which was conducted in Batam on November 7th, 2023. This conference, which has as its theme "Synergizing Green Economy, Sustainable Development, and Digitalization for a Prosperous Future," is a significant international assembly that seeks to integrate technological innovation, economic expansion, and environmental sustainability. An ensemble of stakeholders, comprising policymakers, entrepreneurs, and experts, assembles to examine the mutually beneficial correlation that exists between digital advancements and a green economy. The acceptance rate for ICAE 2023 stands at 25%, leading to the selection of 28 substantial papers. The conference featured three distinct tracks: Informatics, Electronics, and Mechanicals. Two keynote addresses were delivered in conjunction with the outstanding technical paper presentations at the technical program. The keynote addresses were delivered by Dr. Ir. Basuki Rahmatul Alam, Chair of the IEEE EDS Indonesia Chapter and Senior Member of IEEE, and Dr. MK Radhakrishnan, Technical Consultant at NanoRel LLP in Singapore and Vice President of IEEE EDS. Coordination effectiveness with the steering committee was crucial to guaranteeing the conference's success. We wish to convey our profound gratitude for their consistent guidance and support that accompanied the entire undertaking. The ICAE Chair Committee deserves special recognition for their conscientiousness in finalizing the peer-review procedure of technical papers, which ultimately led to the creation of a technical program of exceptional quality. Furthermore, we would like to express our sincere appreciation to the Conference Managers and all the authors who submitted their papers for the ICAE 2023 conference for their invaluable assistance. Additionally, we appreciate the assistance of the EAI staff in facilitating the production of this publication.

The Electronic Device Failure Analysis Society proudly announces the Seventh Edition of the Microelectronics Failure Analysis Desk Reference, published by ASM International. The new edition will help engineers improve their ability to verify, isolate, uncover, and identify the root cause of failures. Prepared by a team of experts, this updated reference offers the latest information on advanced failure analysis tools and techniques, illustrated with numerous real-life examples. This book is geared to practicing engineers and for studies in the major area of power plant engineering. For non-metallurgists, a chapter has been devoted to the basics of material science, metallurgy of steels, heat treatment, and structure-property correlation. A chapter on materials for boiler tubes covers composition and application of different grades of steels and high temperature alloys currently in use as boiler tubes and future materials to be used in supercritical, ultra-supercritical and advanced ultra-supercritical thermal power plants. A comprehensive discussion on different mechanisms of boiler tube failure is the heart of the book. Additional chapters detailing the role of advanced material characterization techniques in failure investigation and the role of water chemistry in tube failures are key contributions to the book.

The book provides a comprehensive overview of electromigration and its effects on the reliability of electronic circuits. It introduces the physical process of electromigration, which gives the reader the requisite understanding and knowledge for adopting appropriate counter measures. A comprehensive set of options is presented for modifying the present IC design methodology to prevent electromigration. Finally, the authors show how specific effects can be exploited in present and future technologies to reduce electromigration’s negative impact on circuit reliability.

Wide Bandgap Semiconductors for Power Electronic A guide to the field of wide bandgap semiconductor technology Wide Bandgap Semiconductors for Power Electronics is a comprehensive and authoritative guide to wide bandgap materials silicon carbide, gallium nitride, diamond and gallium(III) oxide. With contributions from an international panel of experts, the book offers detailed coverage of the growth of these materials, their characterization, and how they are used in a variety of power electronics devices such as transistors and diodes and in the areas of quantum information and hybrid electric vehicles. The book is filled with the most recent developments in the burgeoning field of wide bandgap semiconductor technology and includes information from cutting-edge semiconductor companies as well as material from leading universities and research institutions. By taking both scholarly and industrial perspectives, the book is designed to be a useful resource for scientists, academics, and corporate researchers and developers. This important book: Presents a review of wide bandgap materials and recent developments Links the high potential of wide bandgap semiconductors with the technological implementation capabilities Offers a unique combination of academic and industrial perspectives Meets the demand for a resource that addresses wide bandgap materials in a comprehensive manner Written for materials scientists, semiconductor physicists, electrical engineers, Wide Bandgap Semiconductors for Power Electronics provides a state of the art guide to the technology and application of SiC and related wide bandgap materials.

As we enter the nanoelectronics era, electrostatic discharge (ESD) phenomena is an important issue for everything from micro-electronics to nanostructures. This book provides insight into the operation and design of micro-gaps and nanogenerators with chapters on low capacitance ESD design in advanced technologies, electrical breakdown in micro-gaps, nanogenerators from ESD, and theoretical prediction and optimization of triboelectric nanogenerators. The information contained herein will prove useful for for engineers and scientists that have an interest in ESD physics and design.