The AWC SDPWS-08 covers materials, design and construction of wood members, fasteners, and assemblies to resist wind and seismic forces. Engineered design of wood structures to resist wind or seismic forces is either by allowable stress design (ASD); or load and resistance factor design (LRFD).

The 2015 Wood Design Package brings together all required elements for design of wood structures in one comprehensive document. It includes design information for wind and seismic conditions, sawn lumber, structural glued laminated timber, structural-use panels, shear walls and diaphragms, poles and piles, I-joists, structural composite lumber, structural connections (nails, bolts, screws), and cross-laminated timber.

This CodeMaster contains information about designing typical wood framing members, including glued laminated timber, in accordance with the 2012 IBC, ASCE 7-10 and 2012 National Design Specification.

THE DEFINITIVE WOOD STRUCTURE DESIGN GUIDE -- FULLY UPDATED Thoroughly revised to incorporate the latest codes and standards, the seventh edition of this comprehensive resource leads you through the complete design of a wood structure following the same sequence of materials and elements used in actual design. Detailed equations, clearillustrations, and practical design examples are featured throughout the text. THIS NEW EDITION: Conforms to the 2012 International Building Code (IBC) Addresses the new 2012 National Design Specification for Wood Construction (NDS) Contains dual-format Allowable Stress Design/Load and Resistance Factor Design (ASD/LRFD) specifications,equations, and problems Includes ASCE/SEI 7-10 load provisions DESIGN OF WOOD STRUCTURES--ASD/LRFD, SEVENTH EDITION, COVERS: Wood buildings and design criteria Design loads Behavior of structures under loads and forces Properties of wood and lumber grades Structural glued laminated timber Beam design Axial forces and combined loading Wood structural panels Diaphragms Shearwalls Wood connections Nailed connections Bolts, lag bolts, and other connectors Connection details and hardware Diaphragm-to-shearwall anchorage Advanced topics in lateral force design

Design provisions in the NDS are integral with design values in the NDS Supplement. As such, it is not appropriate to mix design values and provisions from different editions of the NDS. For example, the 2001 NDS Supplement contains increased shear design values for sawn lumber to reflect changes in ASTM D245 and provisions of the 2001 NDS were revised to address these increases.